Popular Products and Equipment in Tashkent | Schetchik.uz

😷 The disposable three-layer face mask is intended for everyday protection against droplets, splashes, dust and some aerosol particles. It covers the nose and mouth and is suitable for public places, offices, transport and cleaning activities; the pack contains five masks, price for 1 pc.

😷 The SSK KN95 protective respirator mask with an exhalation valve is designed to reduce inhalation of dust, fine particles and aerosols. Its shaped construction covers the nose and mouth, while the valve makes exhalation easier and reduces heat and moisture build-up; the seller-stated filtration level is up to 95%. (2 pcs per pack) price for 1 pc.

🔧 The DN20 combined female-thread adapter coupling is designed to connect a 20 mm polypropylene pipe to a valve, filter, meter or other threaded equipment. Its polypropylene socket is heat-fused to the pipe, while the brass insert provides a reliable threaded connection.

🔧 The DN25 brass union tail with coupling is designed to create a detachable threaded connection in water-supply and heating systems. DN25 corresponds to a 1-inch pipe thread, while the coupling enables connection to a pipe, valve, filter, meter or other fitting with a compatible male thread.

⚡ The ESS 1P 32A single-pole miniature circuit breaker is designed to protect a 220 V single-phase electrical circuit against overload and short circuit. The compact module is installed in a distribution board and can protect cable lines, socket circuits and other equipment when correctly selected for the conductor capacity.

🔧 The DN25 combined female-thread adapter coupling is designed to connect a 25 mm polypropylene pipe to 3/4-inch threaded equipment. Its polypropylene socket is heat-fused to the pipe, while the metal insert allows connection of valves, filters, water meters, manifolds and other plumbing equipment.

💧 The size Dn-20 plastic mesh filter is designed for preliminary mechanical filtration of water, capturing sand, rust, pipe scale and other solid particles. It helps protect pipes, valves, water meters, pumps and irrigation equipment from clogging.

⚡ The PRIME DT-70-12-12 copper cable lug is designed for crimp termination of copper conductors with a nominal cross-section of 70 mm². Its approximately 12 mm palm hole is suitable for an M12 bolted connection to a busbar, circuit breaker, incoming device or other electrical equipment.

🔩 The DN20 × DN20 male-threaded barrel nipple is designed to connect two pipeline components with matching female threads. Male threads on both ends allow connection of couplings, valves, filters, check valves and other compatible components in water-supply and heating systems.

💧 The DN25 plastic mesh filter provides preliminary mechanical filtration of water by capturing sand, rust, pipe scale and other solid debris. It helps protect water meters, pumps, valves, taps and irrigation equipment from contamination and clogging.

🔥 The EMMETI DN15 gas filter is designed to remove dust, pipe scale and other solid particles from natural gas and LPG. The threaded filter is installed upstream of a gas meter, pressure regulator, valve or burner equipment to help protect downstream devices from contamination and premature wear.

🔥 The EMMETI DN20 gas filter is designed to remove dust, rust, pipe scale and other solid particles from natural gas and LPG. Installed upstream of a gas meter, pressure regulator, valve or burner equipment, it helps protect downstream components from contamination and premature wear.

⚡ The ESS MSQ-30 150/5 A current transformer is designed to connect electricity meters and measuring instruments to power circuits carrying up to 150 A. It converts a 150 A primary current into a standard 5 A secondary current, enabling safe and accurate measurement without passing the full load current through the meter.

⚡ The ESS TTN-30 100/5 A current transformer converts primary current up to 100 A into a standard 5 A measuring current for electricity meters, ammeters and monitoring systems. Its accuracy class 0.5 and 5 VA rated burden make it suitable for commercial and technical energy metering in electrical panels and distribution equipment.

⚡ The ESS 200/5 A current transformer converts primary current up to 200 A into a standard 5 A measuring current for electricity meters, ammeters and monitoring systems. Its 40:1 transformation ratio enables safe and accurate energy measurement at facilities with high electrical loads.

⚡ The ESS 350 × 250 × 150 mm metal distribution enclosure is designed for wall-mounted installation of electrical protection devices, terminals, relays, controllers and cable connections. Its 0.5 mm steel body includes a removable mounting panel and a 150 mm depth suitable for larger components.

⚡ The SMC protective box for a single-phase electricity meter is designed for neat and safe indoor installation of the meter and related electrical equipment. It features two compartments, a transparent viewing window and an IP53 protection rating, helping protect the equipment against dust, accidental contact and water droplets.

💧 The ZenPro DN15 mechanical water meter is designed to measure cold- and hot-water consumption in apartments, private houses, cottages and small commercial properties. It is installed in a DN15 pipeline, requires no electricity and displays readings on a mechanical register.

💧 The Pulsar DN15 universal water meter is designed to measure cold and hot potable water up to 90 °C in apartments, cottages and internal metering systems. The mechanical meter has a permanent flow rate of 1.5 m³/h, requires no electrical power and is supplied with mounting fittings, gaskets, a non-return valve, passport and certificate; a pulse-output version is also available.

💧 The Pulsar DN20 universal water meter is designed to measure cold and hot potable water up to 90 °C in private houses, cottages and internal metering systems. The mechanical meter has a permanent flow rate of 2.5 m³/h, requires no electrical power and has a 130 mm installation length; a separate pulse-output version is also available.

🔵 The MP100M5 pressure gauge with a 0–1.6 MPa range is designed for visual monitoring of gauge pressure in water, air, gas and other non-aggressive media. It features a 100 mm dial, accuracy class 1.5, a lower radial M20×1.5 connection and measures pressures up to 16 bar.

💧 The BETAR SGV-15 mechanical water meter is designed for accurate measurement of cold and hot potable water up to 90 °C in apartments, private houses, offices and other properties. The compact DN15 meter requires no electrical power, features a threaded connection and is supplied with mounting fittings, a passport and certificate.

⚡ The DDS28U 220 V, 5–60 A single-phase electronic electricity meter is designed to measure active electrical energy in apartments, private houses, cottages and internal monitoring systems. It uses direct connection, displays consumption on an LCD and, when equipped with an active PLC module and compatible concentrator, can transmit data through existing power wiring without a SIM card.

💧 The UzMeter DN15 water meter is designed to measure cold or hot water consumption in apartments, private houses and other installations with 15 mm pipework. The mechanical meter has a threaded connection and durable brass body and is supplied with mounting fittings, gaskets, a passport and certificate; select the required water-temperature version and pulse-output option when ordering.

💧 The BETAR SGV-20 mechanical water meter is designed to measure cold and hot potable water up to 90 °C in private houses, cottages and internal metering systems. The universal DN20 meter has a permanent flow rate of 2.5 m³/h, requires no electrical power and is supplied with mounting fittings, gaskets, a passport and certificate.

📡 The BitCord RS-485/RS-232 GSM/GPRS modem is designed for remote data transmission from meters, controllers and other equipment through a 2G mobile network. Its RS-485 and RS-232 industrial interfaces support different connected devices, while the supplied power adapter provides operating power.

🔥 The NOVATOR household gas alarm with a DN20 shut-off valve is designed to detect a hazardous concentration of domestic gas indoors. When triggered, it provides audible and visual alarms and sends a command to the valve, which automatically shuts off the gas supply. Suitable for apartments, private houses, kitchens and other gas-supplied premises.

💧 The Uzmeter DN25 pulse water meter is designed for mechanical measurement of water consumption in 25 mm pipelines and transmission of pulse signals to an external monitoring system. The threaded meter includes connection parts and a communication cable and can be connected to a separate SWEM modem for automatic remote reading transmission.