Filter mesh plastic Dn-20
Size Dn-20 plastic mesh water filter
💧 The size Dn-20 plastic mesh filter provides preliminary mechanical filtration of water by capturing sand, rust, pipe scale and other solid particles.
It helps protect downstream pipework, water meters, pumps, valves and irrigation equipment from clogging.
🛡️ Captured contaminants
- sand;
- rust particles;
- pipe scale;
- silt and small debris;
- residue remaining after pipe installation.
The filter does not remove dissolved salts, odours, bacteria or chemical contaminants.
📏 Size Dn-20
The “20” designation may refer to 20 mm plastic pipe, DN20 or an approximate 3/4″ connection. Verify the actual connection on the stocked product.
🏠 Applications
- cold-water systems;
- garden irrigation;
- drip irrigation;
- pump protection;
- upstream of water meters;
- upstream of valves and taps.
🧹 Cleaning
Shut off the water, release pipeline pressure, remove and rinse the mesh, inspect the seal and perform a leak test after reassembly.
Never open the filter while the pipeline is pressurised.
✅ Key advantages
- protects equipment from solid particles;
- lightweight plastic body;
- resistant to ordinary metal corrosion;
- simple maintenance;
- suitable for plumbing and irrigation;
- requires no electrical supply.
⚠️ Important: the Schetchik.uz fields “flanged connection” and “low gas pressure” appear incorrect for this water filter and should be replaced with verified product specifications.

Size Dn-20 plastic mesh water filter
💧 The size Dn-20 plastic mesh filter provides preliminary mechanical filtration of water by capturing sand, rust, pipe scale and other solid particles.
It helps protect downstream pipework, water meters, pumps, valves and irrigation equipment from clogging.
🛡️ Captured contaminants
- sand;
- rust particles;
- pipe scale;
- silt and small debris;
- residue remaining after pipe installation.
The filter does not remove dissolved salts, odours, bacteria or chemical contaminants.
📏 Size Dn-20
The “20” designation may refer to 20 mm plastic pipe, DN20 or an approximate 3/4″ connection. Verify the actual connection on the stocked product.
🏠 Applications
- cold-water systems;
- garden irrigation;
- drip irrigation;
- pump protection;
- upstream of water meters;
- upstream of valves and taps.
🧹 Cleaning
Shut off the water, release pipeline pressure, remove and rinse the mesh, inspect the seal and perform a leak test after reassembly.
Never open the filter while the pipeline is pressurised.
✅ Key advantages
- protects equipment from solid particles;
- lightweight plastic body;
- resistant to ordinary metal corrosion;
- simple maintenance;
- suitable for plumbing and irrigation;
- requires no electrical supply.
⚠️ Important: the Schetchik.uz fields “flanged connection” and “low gas pressure” appear incorrect for this water filter and should be replaced with verified product specifications.






.jpg)
.jpg)



 СН4 мал 200.jpg)




































