Купить импульсный счётчик воды SWEM Dn-40 с импульсным выходом в Ташкенте

SWEM DN40 mechanical pulse water meter

💧 The SWEM DN40 is an industrial mechanical water meter with a pulse output, designed to measure water volume in pipelines with a nominal diameter of DN40 — 40 mm.

It combines conventional local mechanical metering with remote data-collection capability. Readings can be viewed directly on the register or transmitted through the pulse output to a modem, controller or automated metering system.

⚙️ Dry-type register

The register is isolated from the measured water and located in a dry chamber. Only the hydraulic measuring section remains in contact with the flow.

This design helps protect the display against contamination and keeps readings clear where water quality is less than ideal.

📊 Pulse-output operation

After a defined volume of water passes, the sensor generates an electrical pulse. The supplied cable can transmit these signals to:

• a SWEM data-transmission modem;
• a controller;
• a pulse counter;
• a dispatch system;
• an automated water-metering platform;
• a data logger.

The pulse output is not an integrated GSM modem. A separate modem is required for cellular transmission.

📡 Remote water metering

A compatible SWEM modem can collect the pulse signals and transmit readings to a remote system.

• automatic collection of readings;
• fewer manual site visits;
• remote consumption monitoring;
• reduced transcription errors;
• consumption archives and reporting;
• faster detection of unusual consumption.

The modem and SIM card are purchased separately.

🛡️ IP68 protection

The product listing specifies an IP68 protection rating, indicating dust-tight construction and protection against water under manufacturer-defined conditions.

Protection at depths up to 35 m is also stated, but the exact depth, duration and cable-sealing conditions must be verified from the supplied passport.

🔩 Pipeline connection

The Schetchik.uz listing contains conflicting information: the page title describes a flanged water meter, while the specification table states a threaded connection.

The actual connection type, face-to-face length and connection dimensions must therefore be confirmed before ordering.

🌡️ Water-temperature suitability

The main description identifies the unit as a cold-water meter, while the specification table also lists hot and universal water metering.

Before installation in hot water, verify the nameplate temperature class and maximum permissible temperature.

✅ Key advantages

• Mechanical dry-type measurement;
• pulse output for automated metering;
• DN40 nominal diameter;
• local readings without external power;
• modem and controller connection;
• communication cable included;
• connection parts and gaskets included;
• durable body for intensive use;
• low hydraulic pressure loss;
• IP68 protection;
• suitable for industrial and commercial sites;
• 12-month warranty.

🏭 Applications

• industrial facilities;
• apartment buildings;
• shopping and business centres;
• hotels;
• warehouses;
• municipal utilities;
• water-supply companies;
• agricultural facilities;
• commercial water-metering stations;
• automated consumption-monitoring systems.

📦 Package contents

• SWEM DN40 pulse water meter;
• pipeline connection parts;
• sealing gaskets;
• pulse-output communication cable;
• product passport;
• box.

The modem, antenna and SIM card are not included in the standard meter package.

⚠️ Confirm before ordering

• threaded or flanged connection;
• water-temperature rating;
• minimum, nominal and maximum flow;
• working and maximum pressure;
• pulse value;
• pulse-sensor type;
• supplied cable length;
• face-to-face length;
• thread size or flange standard;
• accuracy class;
• conditions applicable to IP68;
• compatibility with the selected modem;
• exact package contents.