.jpg)
.jpg)
 СН4 мал 200.jpg)
Ultrasonic gas meter Irvis-Ultra Dn-80-800-AP
Good to know
Articles and guides for this product
IRVIS-Ultra DN80-800-AP ultrasonic gas flow meter
🔥 The IRVIS-Ultra DN80-800-AP is an industrial metering system for commercial and process measurement of natural gas and other compatible non-aggressive gases.
It features a DN80 flanged connection and G800 size and is intended for industrial plants, boiler rooms, gas-regulation stations and CNG filling facilities.
📊 Measuring range
- minimum flow — 1.2 m³/h;
- main upper flow — 800 m³/h;
- limiting flow — up to 3,741 m³/h;
- sensitivity threshold — 0.31 m³/h;
- stated error — 1%.
The 3,741 m³/h value is a limiting figure and must not be treated as a continuous operating flow without verification against the supplied passport.
📏 DN80 flanged connection
The meter is installed in a nominal 80 mm gas pipeline using flanged connections. Confirm the flange standard, pressure rating and face-to-face length.
🛡️ Operating pressure
The stated pressure range is 600–1,600 kPa, equivalent to 0.6–1.6 MPa.
🌡️ Pressure and temperature correction
Pressure and temperature sensors are used to correct measured gas volume to standard conditions.
🗄️ Data archive
The recorder can store measurement data for up to 180 days.
🔋 AP autonomous-power version
AP identifies an autonomous battery-powered configuration. Product-line documentation states battery operation for up to three years.
📡 Communication and gas AMR
- RS-232;
- RS-485;
- remote communication through an external modem;
- gas AMR integration.
The modem and SIM card are not included in the standard package.
🛡️ Enclosure protection
The stated ingress-protection rating is IP65.
✅ Key advantages
- G800 industrial size;
- DN80 flanged connection;
- 1.2–800 m³/h measuring range;
- limiting flow up to 3,741 m³/h;
- 1% stated error;
- pressure up to 1.6 MPa;
- pressure and temperature measurement;
- temperature compensation;
- autonomous power;
- archive up to 180 days;
- RS-232 and RS-485;
- gas AMR integration;
- IP65 protection;
- straight measuring sections;
- manufactured in Russia.
📦 Package contents
- IRVIS-Ultra DN80 primary flow transducer;
- recorder depending on configuration;
- temperature sensor;
- pressure sensor depending on package;
- autonomous power unit;
- straight measuring sections;
- mounting kit;
- connection cables;
- product passport;
- operating manual;
- verification documents;
- certificate.
⚠️ Confirm before ordering
- exact flow range;
- conditions applicable to the 3,741 m³/h limit;
- accuracy class by flow range;
- flange standard and pressure rating;
- face-to-face length;
- straight-section dimensions;
- gas-temperature range;
- pressure- and temperature-sensor versions;
- recorder and archive configuration;
- communication protocols;
- compatible external modem;
- AMR-system compatibility;
- battery type and manufacturing date;
- explosion-protection marking;
- verification date and interval;
- complete supplied package.
⚠️ Important: this industrial system must be selected according to the technical specification and gas-metering design of the individual facility.
ВНИМАНИЕ! В данное время модем вкомплектацию не входит и докупается отдельно. Подходящий модем здесь.
DIQQAT! Hozirgi kunda modemlar koplektasiyaga kirmaydi va alohida sotib olinadi. Irvisga tuhadigan modem.
IRVIS-Ultra DN80-800-AP ultrasonic gas flow meter
🔥 The IRVIS-Ultra DN80-800-AP is an industrial metering system for commercial and process measurement of natural gas and other compatible non-aggressive gases.
It features a DN80 flanged connection and G800 size and is intended for industrial plants, boiler rooms, gas-regulation stations and CNG filling facilities.
📊 Measuring range
- minimum flow — 1.2 m³/h;
- main upper flow — 800 m³/h;
- limiting flow — up to 3,741 m³/h;
- sensitivity threshold — 0.31 m³/h;
- stated error — 1%.
The 3,741 m³/h value is a limiting figure and must not be treated as a continuous operating flow without verification against the supplied passport.
📏 DN80 flanged connection
The meter is installed in a nominal 80 mm gas pipeline using flanged connections. Confirm the flange standard, pressure rating and face-to-face length.
🛡️ Operating pressure
The stated pressure range is 600–1,600 kPa, equivalent to 0.6–1.6 MPa.
🌡️ Pressure and temperature correction
Pressure and temperature sensors are used to correct measured gas volume to standard conditions.
🗄️ Data archive
The recorder can store measurement data for up to 180 days.
🔋 AP autonomous-power version
AP identifies an autonomous battery-powered configuration. Product-line documentation states battery operation for up to three years.
📡 Communication and gas AMR
- RS-232;
- RS-485;
- remote communication through an external modem;
- gas AMR integration.
The modem and SIM card are not included in the standard package.
🛡️ Enclosure protection
The stated ingress-protection rating is IP65.
✅ Key advantages
- G800 industrial size;
- DN80 flanged connection;
- 1.2–800 m³/h measuring range;
- limiting flow up to 3,741 m³/h;
- 1% stated error;
- pressure up to 1.6 MPa;
- pressure and temperature measurement;
- temperature compensation;
- autonomous power;
- archive up to 180 days;
- RS-232 and RS-485;
- gas AMR integration;
- IP65 protection;
- straight measuring sections;
- manufactured in Russia.
📦 Package contents
- IRVIS-Ultra DN80 primary flow transducer;
- recorder depending on configuration;
- temperature sensor;
- pressure sensor depending on package;
- autonomous power unit;
- straight measuring sections;
- mounting kit;
- connection cables;
- product passport;
- operating manual;
- verification documents;
- certificate.
⚠️ Confirm before ordering
- exact flow range;
- conditions applicable to the 3,741 m³/h limit;
- accuracy class by flow range;
- flange standard and pressure rating;
- face-to-face length;
- straight-section dimensions;
- gas-temperature range;
- pressure- and temperature-sensor versions;
- recorder and archive configuration;
- communication protocols;
- compatible external modem;
- AMR-system compatibility;
- battery type and manufacturing date;
- explosion-protection marking;
- verification date and interval;
- complete supplied package.
⚠️ Important: this industrial system must be selected according to the technical specification and gas-metering design of the individual facility.