Ultrasonic gas meter | SPI-Grand G25 | 2 with valve, without DD (T) | Russia

The gas meters "Grand SPI" G25 with a telemetry system and a shut-off valve are designed for: - measurements of the volume of natural gas or liquefied gas vapor; - electronic correction of the volume of gas consumed; - remote data exchange with the control room. The meter is equipped with a shut-off valve, which allows you to fully implement the safety subsystem, as well as remotely control the gas supply, turning off non-payers. SCOPE OF APPLICATION: Commercial accounting of consumed gas: - at public utilities facilities; - at industrial facilities; - where it is possible to reach an ambient temperature of minus 30. INSTALLATION IS ALLOWED: in unheated rooms; on the street in places that exclude direct sunlight. Maintaining archives and printing reports allows you to use meters to account for the consumption of gas consumed by legal entities. features: The meter can be included in the automated gas metering system; Automatic shut-off of gas supply in case of fixing leaks; Monitoring of the gas content of the room, with the gas content sensor connected; Data transmission to the control room via GPRS channel; Full electronic correction of temperature, pressure and gas composition; All devices of the line keep archives of the volume of gas consumption, emergency situations, events, gas composition; Data from the archives of the device is available for printing; Ergonomics (replaces 4 products: counter, corrector, modem, shut-off valve); Outdoor installation is allowed (degree of dust and moisture protection IP65). BY THE COLOR OF THE PROTECTIVE CASING: - White; - Grey; - Orange. BY EXCESS PRESSURE LIMIT: - Maximum overpressure up to 5 kPa; - Maximum overpressure up to 300kPa. BY AMBIENT TEMPERATURE: - From minus 20C to plus 60C; - From minus 40C to plus 60C. ON REDUCTION TO STANDARD CONDITIONS: T is the measurement of the gas volume under operating conditions and the calculation of the volume flow and the volume of gas reduced to standard conditions, with the measurement of the gas temperature and the acceptance of the pressure parameters and the compressibility coefficient as conditionally constant values; TP - measurement of gas volume under operating conditions and calculation of volume flow and volume of gas reduced to standard conditions, with measurement of temperature, gas pressure and acceptance of the compressibility coefficient as a conditionally constant value; TPz-measurement of gas volume under operating conditions and calculation of volume flow and volume of gas reduced to standard conditions, with measurement of temperature, gas pressure and automatic calculation of compressibility coefficient. For more information about the product, please contact the seller by phone: + 998 71 200-18-00