Ultrasonic Gas Meter | Agate G25

Ultrasonic gas meters with automatic temperature compensation AGAT G-25 are designed to measure the volume of gas passed through them (natural gas, liquefied gas, non-aggressive gases) in a low-pressure gas pipeline, bringing the measured volume of gas to normal temperature conditions (+20 °C) For the convenience of consumers of AGAT ultrasonic gas meters, it is possible to adjust the coefficients P (operating overpressure of gas) and G (gas density) at the manufacturer for the real conditions of the gas network of consumers. Information about the total measured volume of gas consumed is displayed on the counter display. It is possible to transmit this information via the RS-232 interface to a centralized automated energy accounting system via a wired line. The meter is fully adapted for use in an automated commercial gas metering system. Advantages of a gas meter: - absence of moving parts and assemblies; - high measurement accuracy; - high stability of metrological characteristics; - the possibility of introducing correction coefficients for gas pressure and density; - automatic reduction of the measured volume to a temperature of +20 °C; - the presence of an RS232 interface for transmitting information; - the ability to calibrate by seven points. The meters are powered from an autonomous power supply with a voltage of U=3.0÷3.6 B, with a capacity of 14A * h (size D) Minimum flow rate Qmin, m3/h - 0.25 Nominal flow rate Qnom, m3/h - 25 Maximum flow rate Qmax, m3/h - 40 Sensitivity threshold, m3/h, not more than - 0.05 The verification interval is 10 years Service life - 25 years