.jpg)
.jpg)
 СН4 мал 200.jpg)
Electricity meter 1-phase | TE71 MP-1-3 220V 10-60A | PLC modem
Related files
- user_interface_te71_uzbcyr.pdf 178.31 KBytes Истеъмолчи учун маълумот - TE71 1-фазали электр ҳисоблагичи
- user_interface_te71_uzblat.pdf 131.10 KBytes Истеъмолчи учун маълумот - TE71 1-фазали электр ҳисоблагичи
- TE71_manual_rus_v2021.1.pdf 1.19 MBytes Руководство по эксплуатации 1-фазного счётчика электроэнергии TE71
- user_interface_te71_rus.pdf 140.70 KBytes Информация для потребителя по установке и эксплуатации 1-фазного счётчика электроэнергии TE71
Good to know
Articles and guides for this product
TE71 MP-1-3 220 V, 10–60 A single-phase electricity meter with PLC module
⚡ The TE71 MP-1-3 is a multifunction electronic meter manufactured by ToshElectroApparat for active and reactive energy measurement in a single-phase two-wire network.
🔤 Model designation
- M — multifunction version;
- P — removable PLC communication module;
- 1 — single-phase meter.
The letter P identifies a PLC module, not a GSM modem.
🔌 Electrical ratings
- network — single-phase, two-wire;
- rated voltage — 220/230 V;
- current rating — 10(60) A;
- maximum current — 60 A;
- frequency — 50 Hz;
- connection — direct;
- starting current — 20 mA.
🎯 Accuracy
- active energy — class 1.0;
- reactive energy — class 2.0;
- meter constant — 1000 imp/kWh.
🕒 Multi-tariff operation
The meter supports up to four tariffs, with schedules based on seasons, day types and time periods.
📡 PLC communication
PLC transmits meter readings through existing power wiring to a compatible data concentrator.
No SIM card is required inside the meter for PLC communication.
A compatible concentrator, server connection and AMR software are required for internet-based remote reading.
🔗 Communication interfaces
- PLC over mains wiring;
- RS-485 wired digital interface;
- optical port for local reading and configuration;
- GSM/GPRS only when a separate compatible module is installed.
💾 Memory and event records
The meter stores tariff registers, load profiles, daily and monthly values and event records in non-volatile memory.
🚨 Monitored events
- meter-cover or terminal-cover opening;
- power failure;
- reverse energy flow;
- phase and neutral current mismatch;
- power-limit violation;
- overvoltage or undervoltage;
- external magnetic influence;
- low internal-battery condition.
🔐 Load control
When the applicable relay is fitted and configured, the system can remotely disconnect or reconnect the load and enforce a power limit.
🌡️ Operating conditions
- normal operating temperature — −25 to +55 °C;
- limiting temperature range — −40 to +70 °C;
- ingress protection — IP54.
📦 Package contents
- TE71 MP-1-3 electricity meter;
- removable PLC module;
- terminal cover;
- product passport;
- operating manual;
- warranty certificate;
- Uzstandard certificate;
- factory box.
✅ Key advantages
- single-phase 220/230 V measurement;
- direct connection up to 60 A;
- removable PLC module;
- active and reactive energy measurement;
- up to four tariffs;
- RS-485 and optical port;
- load profile;
- event logging;
- AMR-system operation;
- manufactured in Uzbekistan.
⚠️ Important: remote reading requires a compatible PLC concentrator and an operational AMR infrastructure in addition to the meter.
Plastic shield Orbita | for 1-phase counter 16.5x30 (white)
1-phase Electricity Meter | Energomera CE-208 S7
1-phase electricity meter | DDS 28 U 220V 5-60A | PLC modem
TE71 MP-1-3 220 V, 10–60 A single-phase electricity meter with PLC module
⚡ The TE71 MP-1-3 is a multifunction electronic meter manufactured by ToshElectroApparat for active and reactive energy measurement in a single-phase two-wire network.
🔤 Model designation
- M — multifunction version;
- P — removable PLC communication module;
- 1 — single-phase meter.
The letter P identifies a PLC module, not a GSM modem.
🔌 Electrical ratings
- network — single-phase, two-wire;
- rated voltage — 220/230 V;
- current rating — 10(60) A;
- maximum current — 60 A;
- frequency — 50 Hz;
- connection — direct;
- starting current — 20 mA.
🎯 Accuracy
- active energy — class 1.0;
- reactive energy — class 2.0;
- meter constant — 1000 imp/kWh.
🕒 Multi-tariff operation
The meter supports up to four tariffs, with schedules based on seasons, day types and time periods.
📡 PLC communication
PLC transmits meter readings through existing power wiring to a compatible data concentrator.
No SIM card is required inside the meter for PLC communication.
A compatible concentrator, server connection and AMR software are required for internet-based remote reading.
🔗 Communication interfaces
- PLC over mains wiring;
- RS-485 wired digital interface;
- optical port for local reading and configuration;
- GSM/GPRS only when a separate compatible module is installed.
💾 Memory and event records
The meter stores tariff registers, load profiles, daily and monthly values and event records in non-volatile memory.
🚨 Monitored events
- meter-cover or terminal-cover opening;
- power failure;
- reverse energy flow;
- phase and neutral current mismatch;
- power-limit violation;
- overvoltage or undervoltage;
- external magnetic influence;
- low internal-battery condition.
🔐 Load control
When the applicable relay is fitted and configured, the system can remotely disconnect or reconnect the load and enforce a power limit.
🌡️ Operating conditions
- normal operating temperature — −25 to +55 °C;
- limiting temperature range — −40 to +70 °C;
- ingress protection — IP54.
📦 Package contents
- TE71 MP-1-3 electricity meter;
- removable PLC module;
- terminal cover;
- product passport;
- operating manual;
- warranty certificate;
- Uzstandard certificate;
- factory box.
✅ Key advantages
- single-phase 220/230 V measurement;
- direct connection up to 60 A;
- removable PLC module;
- active and reactive energy measurement;
- up to four tariffs;
- RS-485 and optical port;
- load profile;
- event logging;
- AMR-system operation;
- manufactured in Uzbekistan.
⚠️ Important: remote reading requires a compatible PLC concentrator and an operational AMR infrastructure in addition to the meter.