.jpg)
.jpg)
 СН4 мал 200.jpg)
Protective box for Osten G6-10
Good to know
Articles and guides for this product
Plastic protective enclosure for Osten G6 and G10 gas meters
🛡️ The Osten G6–G10 protective enclosure is designed to house a domestic gas meter inside a separate lockable cabinet.
It helps protect the meter from rain, snow, dust, dirt, accidental impact and unauthorised access.
✅ Compatibility
- Osten G6;
- Osten G10.
Before ordering, verify the meter dimensions, inlet and outlet arrangement and actual installation layout.
🧱 Durable plastic construction
The enclosure is made of high-strength plastic. Schetchik.uz specifies a wall thickness of 4 mm.
- does not suffer from conventional rust;
- does not require regular repainting;
- relatively lightweight;
- convenient for wall mounting;
- suitable for damp environments when correctly installed.
🔐 Lockable door
The enclosure has a lockable door that limits unauthorised access to the gas meter. A key is included in the stated package.
🏠 Wall-mounted installation
The cabinet is intended for installation on a wall or another strong vertical surface. Fasteners must be selected for the wall material.
🌧️ External protection
- rain and snow;
- dust and dirt;
- sunlight;
- accidental impact;
- unauthorised contact.
No exact IP rating is stated. The enclosure should therefore not be described as completely sealed or waterproof without additional confirmation.
💨 Ventilation
A gas-meter enclosure must retain adequate ventilation. Ventilation openings must not be blocked during installation.
📏 Single compartment
The Schetchik.uz listing specifies one compartment. Whether a pressure regulator, filter or other accessory can also fit depends on the available internal space.
✅ Key advantages
- compatible with Osten G6 and G10;
- 4 mm wall thickness;
- durable plastic construction;
- corrosion-resistant material;
- wall-mounted installation;
- single compartment;
- lockable door;
- key included;
- protection against weather and dirt;
- reduced risk of accidental damage;
- manufactured in Uzbekistan.
📦 Package contents
- plastic protective enclosure;
- lockable door;
- lock key;
- product passport;
- packaging.
The gas meter, pressure regulator, valve, filter, pipe fittings and wall fasteners are purchased separately unless included in a promotional kit.
⚠️ Confirm before ordering
- external and internal dimensions;
- distance between pipe openings;
- location of inlet openings;
- installation around an existing meter;
- ventilation-hole arrangement;
- IP protection rating;
- UV resistance of the plastic;
- operating-temperature range;
- presence of a rear wall;
- door-opening direction;
- mounting hardware inclusion;
- space for a pressure regulator.
⚠️ Important: the protective enclosure does not stop gas leaks and does not replace correct gas-pipeline installation.
Steel ball valve flanged for the size of the valve DN25 PN40
Plastic shield Orbita | for 1-phase counter 16.5x30 (white)
Polymer box for a water meter (52x38x32 cm)
Plastic protective enclosure for Osten G6 and G10 gas meters
🛡️ The Osten G6–G10 protective enclosure is designed to house a domestic gas meter inside a separate lockable cabinet.
It helps protect the meter from rain, snow, dust, dirt, accidental impact and unauthorised access.
✅ Compatibility
- Osten G6;
- Osten G10.
Before ordering, verify the meter dimensions, inlet and outlet arrangement and actual installation layout.
🧱 Durable plastic construction
The enclosure is made of high-strength plastic. Schetchik.uz specifies a wall thickness of 4 mm.
- does not suffer from conventional rust;
- does not require regular repainting;
- relatively lightweight;
- convenient for wall mounting;
- suitable for damp environments when correctly installed.
🔐 Lockable door
The enclosure has a lockable door that limits unauthorised access to the gas meter. A key is included in the stated package.
🏠 Wall-mounted installation
The cabinet is intended for installation on a wall or another strong vertical surface. Fasteners must be selected for the wall material.
🌧️ External protection
- rain and snow;
- dust and dirt;
- sunlight;
- accidental impact;
- unauthorised contact.
No exact IP rating is stated. The enclosure should therefore not be described as completely sealed or waterproof without additional confirmation.
💨 Ventilation
A gas-meter enclosure must retain adequate ventilation. Ventilation openings must not be blocked during installation.
📏 Single compartment
The Schetchik.uz listing specifies one compartment. Whether a pressure regulator, filter or other accessory can also fit depends on the available internal space.
✅ Key advantages
- compatible with Osten G6 and G10;
- 4 mm wall thickness;
- durable plastic construction;
- corrosion-resistant material;
- wall-mounted installation;
- single compartment;
- lockable door;
- key included;
- protection against weather and dirt;
- reduced risk of accidental damage;
- manufactured in Uzbekistan.
📦 Package contents
- plastic protective enclosure;
- lockable door;
- lock key;
- product passport;
- packaging.
The gas meter, pressure regulator, valve, filter, pipe fittings and wall fasteners are purchased separately unless included in a promotional kit.
⚠️ Confirm before ordering
- external and internal dimensions;
- distance between pipe openings;
- location of inlet openings;
- installation around an existing meter;
- ventilation-hole arrangement;
- IP protection rating;
- UV resistance of the plastic;
- operating-temperature range;
- presence of a rear wall;
- door-opening direction;
- mounting hardware inclusion;
- space for a pressure regulator.
⚠️ Important: the protective enclosure does not stop gas leaks and does not replace correct gas-pipeline installation.