Buy Cables and wires at Schetchik.uz

Accessories for cable products 101 product

PRODUCT CATALOG

Popular products

MP100M5 Pressure gauge-1.6 MPa

Protective box for single-phase electric meter SMC box

Transition barrel Dn 20-20 HP

Watch all...

Found products - 1178

ProCab

reset

12/24/36/48

New & Popular

Page 27 from 40

KVVGng 27x1.5

SKU: 20006874

KVVGng 27x1.5 is an abbreviated marking of a control cable with 27 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1.5 sq mm

Sold out

$3.99

$4.05

- 1%

Saving $0.06

VBBSHV 3x10+1x6(oj)-1

SKU: 20005643

VBBSHVNG 3x10+1x6(oj)-1 is a power armored cable - 3 by 10 mm2 + 1 by 6 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VBbShv

Number of cores:

Cross section of the main core:

10 sq mm

Sold out

$4.07

- 1%

Saving $0.07

AVBBSHVNG 4x50-1

SKU: 20004466

AVBBSHVNG 4x50-1 is a power armored cable - 4 by 50 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

AVBbShv

Number of cores:

Cross section of the main core:

50 sq mm

Sold out

$4.02

$4.08

- 1%

Saving $0.06

SIP-2 3x70+1x70 - 0.6/1

SKU: 20008275

SIP-2 3x70+1x70 - 0.6/1 - this is a self-supporting insulated wire (Type-2) - 3 by 70 mm2 + 1 by 70 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

70 sq mm

Sold out

$4.07

$4.14

- 1%

Saving $0.07

SIP-4 4x70 - 0.6/1

SKU: 20008311

SIP-4 4x70 - 0.6/1 - this is a self-supporting insulated wire (Type-4) - 4 by 70 mm2, with aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene.This wire is intended for branches from main power transmission lines to the input and for laying along the walls of buildings and engineering structures at a nominal voltage of up to 1000 Volts inclusive.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

70 sq mm

Sold out

$4.08

$4.15

- 1%

Saving $0.07

KVBBSHVNG 27x1,0

SKU: 20006764

KVBBSHVNG 27x1.0 is an abbreviated marking of an armored control cable with 10 copper cores with a cross section of 1 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$4.09

$4.16

- 1%

Saving $0.07

PV-1 50

SKU: 20007560

PV-1 50 is a power installation wire with a copper multi-wire core with a cross section of 50 square millimeters. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

Brand:

ProCab

Cable type:

Mounting

Cable brand:

Number of cores:

Cross section of the main core:

50 sq mm

Sold out

$4.09

$4.16

- 1%

Saving $0.07

KVBBSHV 37x0,75

SKU: 20006653

KVBBSHV 37x0.75 is an abbreviated marking of an armored control cable with 37 copper cores with a cross section of 0.75 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

0.75 sq mm

Sold out

$4.11

$4.18

- 1%

Saving $0.07

PV-3 50

SKU: 20007528

PV-3 50 is a power installation wire with a copper multi-wire core with a cross section of 50 square millimeters. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

Brand:

ProCab

Cable type:

Mounting

Cable brand:

Number of cores:

Cross section of the main core:

50 sq mm

Sold out

$4.15

$4.22

- 1%

Saving $0.07

KVVGE 10x4,0

SKU: 20006955

KVVGE 10x4.0 is an abbreviated marking of a control cable with 10 copper cores, a cross section of 4.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

4 sq mm

Sold out

$4.18

$4.25

- 1%

Saving $0.07

KVVGEng(A) 14x2.5

SKU: 20007020

KVVGEng(A) 14x2.5 is an abbreviated marking of a control cable with 14 copper cores, 2.5 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$4.20

$4.27

- 1%

Saving $0.07

A 16

SKU: 20004319

And 16 is an aluminum non-insulated wire for overhead power lines, with a residential cross section of 16 millimeters square.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

Number of cores:

Cross section of the main core:

16 sq mm

Sold out

$4.21

$4.28

- 1%

Saving $0.07

VBBSHVNG 3x10+1x6(oj)-1

SKU: 20005804

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VBbShv

Number of cores:

Cross section of the main core:

10 sq mm

Sold out

$4.21

$4.28

- 1%

Saving $0.07

RUNWAY 50

SKU: 20006649

Runway 50 is a power water-submersible (deep) wire (cable) with one copper multi-wire core with a cross section of 50 millimeters square, in polyethylene insulation and shell.The water-submersible deep wire is designed for connection to electrical networks with a voltage of up to 660 Volts with a frequency of 50 Hertz, for operation in a fixed position during long-term operation of water-submersible electric motors in the water of artesian wells under a pressure of 6.86x106 Pa at ambient temperatures from -40 ° C to +80 ° C.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VPP

Number of cores:

Cross section of the main core:

50 sq mm

Sold out

$4.23

$4.30

- 1%

Saving $0.07

KVVG 19x2.5

SKU: 20006775

KVVG 19x2.5 is an abbreviated marking of a control cable with 19 copper cores, 2.5 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$4.23

$4.30

- 1%

Saving $0.07

VBSHV 3x10mk+1x4ok(PE)-0.66

SKU: 20005707

Cable VBSHV 3x10mk+1x4ok(PE)-0.66 from the power class with a copper core, equipped with a durable and non-flammable plastic shell, reliable insulation; used as a device transmitting and distributing electricity in stationary installations. Optimal operation is at a frequency of 50 Hz and a voltage within 0.66 — 1 kV.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VBShv

Number of cores:

Cross section of the main core:

10 sq mm

Sold out

$4.24

$4.31

- 1%

Saving $0.07

KVBBSHVNG(A) 19x1.5

SKU: 20006716

KVBBSHVNG(A) 19x1.5 is an abbreviated marking of an armored control cable with 19 copper cores with a cross section of 1.5 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

1.5 sq mm

Sold out

$4.25

$4.32

- 1%

Saving $0.07

AVBbShv 3x70-1

SKU: 20004334

AVBbShv 3x70-1 is a power armored cable - 3 by 70 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

AVBbShv

Number of cores:

Cross section of the main core:

70 sq mm

Sold out

$4.25

$4.32

- 1%

Saving $0.07

KVVGng(A) 10x4,0

SKU: 20006856

KVVGng(A) 10x4.0 is an abbreviated marking of a control cable with 10 copper cores, a cross section of 4.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

4 sq mm

Sold out

$4.25

$4.33

- 1%

Saving $0.08

AVBBSHVNG 3x70-1

SKU: 20004442

AVBBSHVNG 3x70-1 is a power armored cable - 3 by 70 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

AVBbShv

Number of cores:

Cross section of the main core:

70 sq mm

Sold out

$4.28

$4.35

- 1%

Saving $0.07

APvPu 1x120/16-10

SKU: 20005552

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

Brand:

ProCab

Cable type:

Mounting

Cable brand:

APV

Number of cores:

Cross section of the main core:

120 sq mm

Sold out

$4.29

$4.36

- 1%

Saving $0.07

KVVGng(A)-LS 10x4,0

SKU: 20006855

KVVGng(A)-LS 10x4.0 is an abbreviated marking of a control cable with 10 copper cores, a cross section of 4.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

4 sq mm

Sold out

$4.29

$4.37

- 1%

Saving $0.08

PuGV 1x50,0

SKU: 20007822

PuGV 1x50 is a power installation (mounting) wire with a copper multi-wire core with a cross section of 50 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

Brand:

ProCab

Cable type:

Mounting

Cable brand:

PUGB

Number of cores:

Cross section of the main core:

50 sq mm

Sold out

$4.32

$4.40

- 1%

Saving $0.08

VBBSHV 4x10(oj)-1

SKU: 20005661

VBBSHVNG 4x10(oj)-1 is a power armored cable - 4 by 10 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VBbShv

Number of cores:

Cross section of the main core:

10 sq mm

Sold out

$4.33

$4.40

- 1%

Saving $0.07

KVVGE 37x1,0

SKU: 20006972

KVVGE 37x1.0 is an abbreviated marking of a control cable with 37 copper cores, a cross section of 1.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$4.35

$4.42

- 1%

Saving $0.07

KVBBSHVNG 14x2.5

SKU: 20006760

KVBBSHVNG 14x2.5 is an abbreviated marking of an armored control cable with 14 copper cores with a cross section of 2.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$4.36

$4.43

- 1%

Saving $0.07

VBSHV 3x10mk+1x4ok(PE)-1

SKU: 20005708

The VBSHV 5x35mk-0.66 cable is from the power class with a copper core, equipped with a durable and non-flammable plastic shell, reliable insulation; it is used as a device transmitting and distributing electricity in stationary installations. Optimal operation is at a frequency of 50 Hz and a voltage within 0.66 — 1 kV.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VBShv

Number of cores:

Cross section of the main core:

10 sq mm

Sold out

$4.38

$4.46

- 1%

Saving $0.08

KVVGng(A) 37x1,0

SKU: 20006840

KVVGng(A) 37x1.0 is an abbreviated marking of a control cable with 37 copper cores, a cross section of 1.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$4.39

$4.47

- 1%

Saving $0.08

KVVGE 27x1.5

SKU: 20006958

KVVGE 27x1.5 is an abbreviated marking of a control cable with 27 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1.5 sq mm

Sold out

$4.40

$4.47

- 1%

Saving $0.07

KVVGng 19x2.5

SKU: 20006880

KVVGng 19x2.5 is an abbreviated marking of a control cable with 19 copper cores, 2.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$4.40

$4.47

- 1%

Saving $0.07