ProCab

KVVGE 4x4.0 is an abbreviated marking of a control cable with 4 copper cores, a cross section of 4.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

AC 70/11 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 70 millimeters square and a steel bearing core with a cross section of 11 mm2. The wire is designed for installation on overhead power lines.

PuGV 1x6.0 is a power installation (mounting) wire with a copper multi-wire core with a cross section of 6.0 millimeters square. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PV-3 6.0 is a power installation wire with a copper multi-wire core with a cross section of 6.0 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PuGV 1x0.5 is a power installation (mounting) wire with a copper multi-wire core with a cross section of 0.5 millimeters square. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PV-1 0.75 is a power installation wire with a copper multi-wire core with a cross section of 0.75 square millimeters. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PuGV 1x0.75 is a power installation (mounting) wire with a copper multi-wire core with a cross section of 0.75 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PPV wire 2x1.5 copper flat 2-core mounting with a separate base. Wires are used for electrical installations with stationary laying in lighting and power networks, as well as for the installation of electrical equipment, machines, mechanisms and machine tools at a rated voltage of up to 450 Volts (U0 /U=450/750 V) with a frequency of 400 Hz or a constant voltage of up to 1000 Volts.

PuGV 1x4.0 is a power installation (mounting) wire with a copper multi-wire core with a cross section of 4.0 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PV-3 4.0 is a power installation wire with a copper multi-wire core with a cross section of 4.0 square millimeters. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PV-1 6.0 is a power installation wire with a copper multi-wire core with a cross section of 6.0 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PV-2 10 is a power installation wire with a copper multi-wire core with a cross section of 10 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PV-2 6.0 is a power installation wire with a copper multi-wire core with a cross section of 6.0 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PV-3 50 is a power installation wire with a copper multi-wire core with a cross section of 50 square millimeters. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PuGV 1x1.0 is a power installation (mounting) wire with a copper multi-wire core with a cross section of 1.0 millimeters square. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PV-5 16 is a power installation wire with a copper multi-wire core with a cross section of 16 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PV-3 1.0 is a power installation wire with a copper multi-wire core with a cross section of 1.0 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PV-3 0.35 is a power installation wire with a copper multi-wire core with a cross section of 0.35 square millimeters. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PuGV 1x1.5 is a power installation (mounting) wire with a copper multi-wire core with a cross section of 1.5 millimeters square. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PuGV 1x50 is a power installation (mounting) wire with a copper multi-wire core with a cross section of 50 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PV-1 16 is a power installation wire with a copper multi-wire core with a cross section of 16 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PV-3 240 is a power installation wire with a copper multi-wire core with a cross section of 240 square millimeters. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PuGV 1x95 is a power installation (mounting) wire with a copper multi-wire core with a cross section of 95 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PV-1 70 is a power installation wire with a copper multi-wire core with a cross section of 70 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PV-3 150 is a power installation wire with a copper multi-wire core with a cross section of 150 square millimeters. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PV-3 1.5 is a power installation wire with a copper multi-wire core with a cross section of 50 square millimeters. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PV-1 1.5 is a power installation wire with a copper multi-wire core with a cross section of 1.5 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PuGV 1x25 is a power installation (mounting) wire with a copper multi-wire core with a cross section of 25 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PuGV 1x16.0 is a power installation (mounting) wire with a copper multi-wire core with a cross section of 16.0 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PV-1 4.0 is a power installation wire with a copper multi-wire core with a cross section of 4.0 square millimeters. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.