ProCab

Runway 25 is a power water-submersible (deep) wire (cable) with one copper multi-wire core with a cross section of 25 millimeters square, in polyethylene insulation and shell.The water-submersible deep wire is designed for connection to electrical networks with a voltage of up to 660 Volts with a frequency of 50 Hertz, for operation in a fixed position during long-term operation of water-submersible electric motors in the water of artesian wells under a pressure of 6.86x106 Pa at ambient temperatures from -40 ° C to +80 ° C.

APV 6.0 is a power wire with one aluminum core with a cross section of 6.0 millimeters square. The APV 6.0 wire is designed for stationary installation of electrical circuits with a rated voltage of up to 400 Volts, a frequency of 50 Hertz, a current of up to 63 amperes.

KVBBSHV 14x1.0 is an abbreviated marking of an armored control cable with 14 copper cores with a cross section of 1.0 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 10x1.0 is an abbreviated marking of a control cable with 10 copper cores, a cross section of 1.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 27x1.5 is an abbreviated marking of an armored control cable with 27 copper cores with a cross section of 1.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 4x6.0 is an abbreviated marking of a control cable with 4 copper cores, a cross section of 6.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 27x2.5 is an abbreviated marking of a control cable with 27 copper cores, 2.5 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHVNG 7x1.0 is an abbreviated marking of an armored control cable with 7 copper cores with a cross section of 1 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 10x4.0 is an abbreviated marking of a control cable with 10 copper cores, a cross section of 4.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 14x1.5 is an abbreviated marking of a control cable with 14 copper cores, a 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 37x1.5 is an abbreviated marking of an armored control cable with 37 copper cores with a cross section of 1.5 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 4x1.0 is an abbreviated marking of an armored control cable with 4 copper cores with a cross section of 1.0 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 14x2.5 is an abbreviated marking of a control cable with 14 copper cores, 2.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 5x2.5 is an abbreviated marking of an armored control cable with 5 copper cores with a cross section of 2.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 14x1.5 is an abbreviated marking of a control cable with 14 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 14x2.5 is an abbreviated marking of an armored control cable with 14 copper cores with a cross section of 2.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 10x1.5 is an abbreviated marking of an armored control cable with 10 copper cores with a cross section of 1.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 5x1.0 is an abbreviated marking of an armored control cable with 5 copper cores with a cross section of 1.0 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 5x1.5 is an abbreviated marking of a control cable with 5 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 10x1.5 is an abbreviated marking of a control cable with 10 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic with reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 37x1.0 is an abbreviated marking of a control cable with 37 copper cores, a cross section of 1.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 19x2.5 is an abbreviated marking of the control cable with 19 copper cores, 2.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 7x4.0 is an abbreviated marking of a control cable with 7 copper cores, a cross section of 4.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 10x2.5 is an abbreviated marking of an armored control cable with 10 copper cores with a cross section of 2.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 5x1.5 is an abbreviated marking of a control cable with 5 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 4x1.5 is an abbreviated marking of a control cable with 4 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHVNG 10x1.0 is an abbreviated marking of an armored control cable with 10 copper cores with a cross section of 1.0 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 27x1.0 is an abbreviated marking of a control cable with 27 copper cores, a cross section of 1.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 5x4.0 is an abbreviated marking of a control cable with 5 copper cores, a cross section of 4.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 19x1.5 is an abbreviated marking of a control cable with 19 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.