ProCab

APV 10 is a power wire with one aluminum core with a cross section of 10 millimeters square. The APV 10 wire is designed for stationary installation of electrical circuits with a rated voltage of up to 400 Volts, a frequency of 50 Hertz, a current of up to 63 amperes.

PV-3 25 is a power installation wire with a copper multi-wire core with a cross section of 25 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

AC 300/48 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 300 millimeters square and a steel bearing core with a cross section of 48 mm2. The wire is designed for installation on overhead power lines.

AC 120/27 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 120 millimeters square and a steel bearing core with a cross section of 27 mm2. The wire is designed for installation on overhead power lines.

A 50 is an aluminum non-insulated wire for overhead power lines, with a residential cross section of 50 millimeters square.

A 150 is an aluminum non-insulated wire for overhead power lines, with a residential cross section of 150 millimeters square.

KVSPVe 4x2x0.52 (UTP) cable is designed for station laying inside buildings, stations, structures, in equipment and operation in structured cable communication systems in the frequency range up to 100 MHz at temperatures from -30 to + 60 ° C.

AC 300/39 wire is a non—insulated steel-aluminum wire, the core of which is made of steel wires, and the rest of it is made of aluminum wires.

AC 125/20.4 is an uninsulated steel—aluminum wire, the core of which is made of seven steel wires, and the rest is made of two aluminum wires.

AC 240/32 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 240 millimeters square and a steel bearing core with a cross section of 32 mm2.

AC 120/19 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 120 millimeters square and a steel bearing core with a cross section of 19 mm2.

And 16 is an aluminum non-insulated wire for overhead power lines, with a residential cross section of 16 millimeters square.

The cables are designed for stationary laying inside buildings and structures with a polyvinyl chloride plastic sheath.

GSP wire 1x0.5 is a field communication wire for geophysical research in the field signal-power, for laying in the ground, on the ground, for suspension on supports, short-term laying through water barriers.

PV-3 70 is a power installation wire with a copper multi-wire core with a cross section of 70 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

AC 185/43 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 185 millimeters square and a steel bearing core with a cross section of 43 mm2.

A 95 is an aluminum non-insulated wire for overhead power lines, with a residential cross section of 95 millimeters square.

A 70 is an aluminum non-insulated wire for overhead power lines, with a residential section of 70 millimeters square.

PV-1 35 is a power installation wire with a copper multi-wire core with a cross section of 35 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

A 500 is an aluminum non-insulated wire for overhead power lines, with a residential cross section of 500 square millimeters.

PVDPO 3,18 is a winding wire with a copper core in double-layer polyethylene insulation. The wires are designed for winding the stators of submerged water-filled electric motors that work for a long time in the water of artesian wells at a voltage of up to 660 V AC to 660 V AC with a frequency of 50 Hz.

AC 330/43 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 330 millimeters square and a steel bearing core with a cross section of 43 mm2.

The PVDPO 3.54 winding wire is designed for winding stators of submersible water-filled electric motors. The vein is copper wire. Insulation — low density polyethylene. The shell is light—stabilized polyethylene.

The winding wire PVDPO 5,30 is designed for winding stators of submersible water-filled electric motors. The vein is copper wire. Insulation — low density polyethylene. The shell is light—stabilized polyethylene.

AC 150/24 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 150 millimeters square and a steel bearing core with a cross section of 24 mm2.

The PVDPO 1.06 winding wire is designed for winding stators of submersible water-filled electric motors. The vein is copper wire. Insulation — low density polyethylene. The shell is light—stabilized polyethylene.

The PVDPO 1.30 winding wire is designed for winding stators of submersible water-filled electric motors. The vein is copper wire. Insulation — low density polyethylene. The shell is light—stabilized polyethylene.

AC 185/29 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 185 millimeters square and a steel bearing core with a cross section of 29 mm2.

PV-1 0.5 is a power installation wire with a copper multi-wire core with a cross section of 0.5 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

The PVDPO 1.60 winding wire is designed for winding stators of submersible water-filled electric motors. The vein is copper wire. Insulation — low density polyethylene. The shell is light—stabilized polyethylene.