Buy Cables and wires at Schetchik.uz

Accessories for cable products 101 product

PRODUCT CATALOG

Popular products

Protective box for single-phase electric meter SMC box

Ultrasonic Gas Meter Irvis-Ultra Dn-100-1250-AP

Automatic switch ESS 1P 32A

Watch all...

Found products - 1178

ProCab

reset

12/24/36/48

New & Popular

Page 24 from 40

SIP-3 1x240-35

SKU: 20008277

SIP-3 1x240-35 is a self-supporting insulated wire (Type-3) - 1 by 240 mm2, with steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

240 sq mm

Sold out

$3.26

$3.31

- 1%

Saving $0.05

RUNWAY 35 - 380

SKU: 20006694

Runway 35 - 380 is a power water-submersible (deep) wire (cable) with one copper multi-wire core with a cross section of 35 millimeters square, in polyethylene insulation and shell.The water-submersible deep wire is designed for connection to electrical networks with a voltage of up to 660 Volts with a frequency of 50 Hertz, for operation in a fixed position during long-term operation of water-submersible electric motors in the water of artesian wells under a pressure of 6.86x106 Pa at ambient temperatures from -40 ° C to +80 ° C.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VPP

Number of cores:

Cross section of the main core:

35 sq mm

Sold out

$3.27

$3.32

- 1%

Saving $0.05

KVVGng 14x2.5

SKU: 20006818

KVVGng 14x2.5 is an abbreviated marking of a control cable with 14 copper cores, 2.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$3.27

$3.32

- 1%

Saving $0.05

KVVGEng 7x4,0

SKU: 20006980

KVVGEng 7x4.0 is an abbreviated marking of a control cable with 7 copper cores, a cross section of 4.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

4 sq mm

Sold out

$3.27

$3.32

- 1%

Saving $0.05

VBBSHV 3x10(oj)-0.66

SKU: 20005606

VBBSHVNG 3x10(oj)-0.66 is a power armored cable - 3 by 10 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VBbShv

Number of cores:

Cross section of the main core:

10 sq mm

Sold out

$3.28

$3.34

- 1%

Saving $0.06

AVBBSHVNG 4x35-1

SKU: 20004450

AVBBSHVNG 4x35-1 is a power armored cable - 4 by 35 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

AVBbShv

Number of cores:

Cross section of the main core:

35 sq mm

Sold out

$3.28

$3.34

- 1%

Saving $0.06

SIP-2 3x50+1x70

SKU: 20008250

SIP-2 3x50+1x70 is a self-supporting insulated wire (Type-2) - 3 by 50 mm2 + 1 by 70 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

50 sq mm

Sold out

$3.29

$3.34

- 1%

Saving $0.05

AVBBSHVNG 3x50-1

SKU: 20004410

AVBBSHVNG 3x50-1 is a power armored cable - 3 by 50 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

AVBbShv

Number of cores:

Cross section of the main core:

50 sq mm

Sold out

$3.29

$3.34

- 1%

Saving $0.05

KVVGEng(A)-LS 10x2.5

SKU: 20007032

KVVGEng(A)-LS 10x2.5 is an abbreviated marking of a control cable with 10 copper cores, a cross section of 2.5 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$3.31

$3.36

- 1%

Saving $0.05

RUNWAY 35 - 660

SKU: 20006631

RUNWAY 35 - 660 is a power water-submersible (deep) wire (cable) with one copper multi-wire core with a cross section of 35 millimeters square, in polyethylene insulation and shell.The water-submersible deep wire is designed for connection to electrical networks with a voltage of up to 660 Volts with a frequency of 50 Hertz, for operation in a fixed position during long-term operation of water-submersible electric motors in the water of artesian wells under a pressure of 6.86x106 Pa at ambient temperatures from -40 ° C to +80 ° C.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VPP

Number of cores:

Cross section of the main core:

35 sq mm

Sold out

$3.32

$3.37

- 1%

Saving $0.05

KVBBSHV 7x4,0

SKU: 20006645

KVBBSHV 7x4.0 is an abbreviated marking of an armored control cable with 7 copper cores with a cross section of 4.0 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

4 sq mm

Sold out

$3.32

$3.37

- 1%

Saving $0.05

AC 240/39

SKU: 20005577

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

Number of cores:

Cross section of the main core:

240 sq mm

Sold out

$3.32

$3.38

- 1%

Saving $0.06

KVVGng(A)-LS 27x1,0

SKU: 20006876

KVVGng-LS 27x1 is an abbreviated marking of a control cable with 27 copper cores, a cross section of 1 mm square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The control non-combustible KVVGng-LS 27*1 cable is designed for fixed connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$3.32

$3.38

- 1%

Saving $0.06

KVVG 37x0,75

SKU: 20006903

KVVG 37x0.75 is an abbreviated marking of a control cable with 37 copper cores, 0.75 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

0.75 sq mm

Sold out

$3.34

$3.39

- 1%

Saving $0.05

VBBSHVNG 4x6(oj)-1

SKU: 20005789

VBBSHVNG 4x6(oj)-1 is a power armored cable with tapes - 4 by 6 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VBbShv

Number of cores:

Cross section of the main core:

6 sq mm

Sold out

$3.34

$3.39

- 1%

Saving $0.05

AC 500/64

SKU: 20005633

AC 500/64 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 500 millimeters square and a steel bearing core with a cross section of 64 mm2.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

Number of cores:

Cross section of the main core:

500 sq mm

Sold out

$3.34

$3.39

- 1%

Saving $0.05

KVVGE 7x4

SKU: 20006962

KVVGE 7x4 is an abbreviated marking of a control cable with 7 copper cores, a cross section of 4 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

4 sq mm

Sold out

$3.34

$3.40

- 1%

Saving $0.06

KVVGE 27x1,0

SKU: 20006983

KVVGE 27x1.0 is an abbreviated marking of a control cable with 27 copper cores, a cross section of 1.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$3.35

$3.41

- 1%

Saving $0.06

KVVGgng 19x1.5

SKU: 20006848

KVVGgng 19x1.5 is an abbreviated marking of a control cable with 19 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1.5 sq mm

Sold out

$3.37

$3.43

- 1%

Saving $0.06

ERW 35.0 - 380

SKU: 20006566

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VPV

Number of cores:

Cross section of the main core:

380 sq mm

Sold out

$3.38

$3.43

- 1%

Saving $0.05

VBBSHV 5x6(oj)-0.66

SKU: 20005714

VBBSHVNG 5x6(oj)-0.66 is a power armored cable with tapes - 5 by 6 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VBbShv

Number of cores:

Cross section of the main core:

6 sq mm

Sold out

$3.38

$3.43

- 1%

Saving $0.05

AVBbShv 5x35-1

SKU: 20004393

AVBbShv 5x35-1 is a power armored cable - 5 by 31 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

AVBbShv

Number of cores:

Cross section of the main core:

35 sq mm

Sold out

$3.39

$3.44

- 1%

Saving $0.05

KVVGng(A) 37x0,75

SKU: 20006853

KVVGng(A) 37x0.75 is an abbreviated marking of a control cable with 37 copper cores, 0.75 mm square cross-section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

0.75 sq mm

Sold out

$3.39

$3.45

- 1%

Saving $0.06

AC 400/51

SKU: 20005672

AC 400/50 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 400 millimeters square and a steel bearing core with a cross section of 51 mm2.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

Number of cores:

Cross section of the main core:

400 sq mm

Sold out

$3.39

$3.45

- 1%

Saving $0.06

AVBbShv 4x50-1

SKU: 20004333

AVBbShv 4x50-1 is a power armored cable - 4 by 50 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

AVBbShv

Number of cores:

Cross section of the main core:

50 sq mm

Sold out

$3.40

$3.46

- 1%

Saving $0.06

KVPBSHV 7x4-0.66

SKU: 20007008

KVPBSHV 7x4-0.66 is an abbreviated marking of an armored control cable with 7 copper cores with a cross section of 4 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVPbShv

Number of cores:

Cross section of the main core:

4 sq mm

Sold out

$3.41

$3.47

- 1%

Saving $0.06

VBBSHV 3x10(oj)-1

SKU: 20005659

VBBSHVNG 3x10(oj)-1 is a power armored cable - 5 by 120 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VBbShv

Number of cores:

Cross section of the main core:

10 sq mm

Sold out

$3.42

$3.48

- 1%

Saving $0.06

KVBBSHVNG(A) 19x1,0

SKU: 20006722

KVBBSHVNG(A) 19x1.0 is an abbreviated marking of an armored control cable with 19 copper cores with a cross section of 1.0 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$3.42

$3.48

- 1%

Saving $0.06

KVVGng(A)-LS 37x0,75

SKU: 20006981

KVVGEng-LS 37x0.75 is an abbreviated marking of a control shielded cable with 37 cores with a cross section of 0.75 square millimeters in insulation and a shell made of PVC plastic of reduced fire hazard with low smoke emission. The KVVGEng-LS 37x0.75 control shielded cable is designed for stationary connection to electrical devices and apparatus with a nominal alternating voltage of up to 660 Volts with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

0.75 sq mm

Sold out

$3.45

$3.51

- 1%

Saving $0.06

APvPu 1x70/16-10

SKU: 20005588

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

Brand:

ProCab

Cable type:

Mounting

Cable brand:

APV

Number of cores:

Cross section of the main core:

70 sq mm

Sold out

Bought - 118 pcs

$3.46

$3.52

- 1%

Saving $0.06