Buy Cables and wires at Schetchik.uz

Accessories for cable products 101 product

PRODUCT CATALOG

Popular products

Hot Cold Pulse Water Meter | Pulsar Dn-15

ZenPro Dn-15 Mechanical Water Meter

Filter mesh plastic Dn-25

Watch all...

Found products - 1178

ProCab

reset

12/24/36/48

New & Popular

Page 23 from 40

KVBBSHV 19x1

SKU: 20006637

KVBBSHV 19x1 is an abbreviated marking of an armored control cable with 19 copper cores with a cross section of 1 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$2.99

$3.04

- 1%

Saving $0.05

SIP-2 3x50+1x50 - 0.6/1

SKU: 20008265

SIP-2 3x50+1x50 - 0.6/1 - this is a self-supporting insulated wire (Type-2) - 3 by 50 mm2 + 1 by 50 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

50 sq mm

Sold out

$2.99

$3.04

- 1%

Saving $0.05

SIP-3 1x240-20

SKU: 20008229

SIP-3 1x240-20 is a self-supporting insulated wire (Type-3) - 1 by 240 mm2, with steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

240 sq mm

Sold out

$2.99

$3.04

- 1%

Saving $0.05

KVVGng(A) 7x4,0

SKU: 20006826

KVVGng(A) 7x4.0 is an abbreviated marking of a control cable with 7 copper cores, a cross section of 4.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

4 sq mm

Sold out

$2.99

$3.04

- 1%

Saving $0.05

KVVGng(A)-LS 7x4,0

SKU: 20006992

KVVGng(A)-LS 7x4.0 is an abbreviated marking of a control cable with 7 copper cores, a cross section of 4.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The control non-combustible KVVGng(A)-LS 7x4.0 cable is designed for fixed connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

4 sq mm

Sold out

$3.01

$3.06

- 1%

Saving $0.05

KVVGEng(A)-LS 4x6,0

SKU: 20007010

KVVGEng(A)-LS 4x6.0 is an abbreviated marking of a control cable with 4 copper cores, a cross section of 6.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

6 sq mm

Sold out

$3.02

$3.07

- 1%

Saving $0.05

KVBBSHV 10x2.5

SKU: 20006638

KVBBSHV 10x2.5 is an abbreviated marking of an armored control cable with 10 copper cores with a cross section of 2.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$3.02

$3.07

- 1%

Saving $0.05

KVVGE 7x4,0

SKU: 20006948

KVVGE 7x4.0 is an abbreviated marking of a control cable with 7 copper cores, a cross section of 4.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

4 sq mm

Sold out

$3.03

$3.08

- 1%

Saving $0.05

SIP-2 3x50+1x54,6

SKU: 20008235

SIP-2 3x50+1x54.6 is a self-supporting insulated wire (Type-2) - 3 by 50 mm2 + 1 by 54.6 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

50 sq mm

Sold out

$3.05

$3.10

- 1%

Saving $0.05

PuGV 1x35,0

SKU: 20007888

PuGV 1x35 is a power installation (mounting) wire with a copper multi-wire core with a cross section of 35 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

Brand:

ProCab

Cable type:

Mounting

Cable brand:

PUGB

Number of cores:

Cross section of the main core:

35 sq mm

Sold out

$3.07

$3.12

- 1%

Saving $0.05

AVBBSHVNG 3x35+1x16-1

SKU: 20004472

AVBBSHVNG 3x35+1x16-1 is a power armored cable - 3 by 35 mm2 + 1 by 16 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

AVBbShv

Number of cores:

Cross section of the main core:

35 sq mm

Sold out

$3.07

$3.12

- 1%

Saving $0.05

PuGV 1x35

SKU: 20007876

Brand:

ProCab

Cable type:

Mounting

Cable brand:

PUGB

Number of cores:

Cross section of the main core:

35 sq mm

Sold out

$3.13

$3.19

- 1%

Saving $0.06

SIP-4 2x120

SKU: 20008286

SIP-4 2x120 is a self-supporting insulated wire (Type-4) - 2 by 120 mm2, with aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene.This wire is intended for branches from main power transmission lines to the input and for laying along the walls of buildings and engineering structures at a nominal voltage of up to 1000 Volts inclusive.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

120 sq mm

Sold out

$3.14

$3.19

- 1%

Saving $0.05

VBSHV 4x6ok-0.66

SKU: 20005870

The cable VBSHV 4x6ok-0.66 from the power class with a copper core, is equipped with a durable and non-flammable plastic shell, reliable insulation; it is used as a device transmitting and distributing electricity in stationary installations. Optimal operation is at a frequency of 50 Hz and a voltage within 0.66 — 1 kV.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VBShv

Number of cores:

Cross section of the main core:

6 sq mm

Sold out

$3.14

$3.19

- 1%

Saving $0.05

KVVG 14x2.5

SKU: 20006773

KVVG 14x2.5 is an abbreviated marking of a control cable with 14 copper cores, 2.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$3.14

$3.19

- 1%

Saving $0.05

AVBbShv 3x50+1x25-1

SKU: 20004374

AVBbShv 3x50+1x25-1 is a power armored cable - 3 by 50 mm2 + 1 by 25 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

AVBbShv

Number of cores:

Cross section of the main core:

50 sq mm

Sold out

$3.15

$3.20

- 1%

Saving $0.05

AC 185/43

SKU: 20005536

AC 185/43 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 185 millimeters square and a steel bearing core with a cross section of 43 mm2.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

Number of cores:

Cross section of the main core:

185 sq mm

Sold out

$3.15

$3.21

- 1%

Saving $0.06

KVBBSHV 27x0.75

SKU: 20006674

KVBBSHV 27x0.75 is an abbreviated marking of an armored control cable with 27 copper cores with a cross section of 0.75 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

0.75 sq mm

Sold out

$3.15

$3.21

- 1%

Saving $0.06

KVBBSHVNG(A) 14x1.5

SKU: 20006786

KVBBSHVNG(A) 14x1.5 is an abbreviated marking of an armored control cable with 14 copper cores with a cross section of 1.5 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

1.5 sq mm

Sold out

$3.17

$3.22

- 1%

Saving $0.05

SIP-2 3x50+1x70

SKU: 20008299

SIP-2 3x50+1x70 is a self-supporting insulated wire (Type-2) - 3 by 50 mm2 + 1 by 70 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

50 sq mm

Sold out

$3.17

$3.22

- 1%

Saving $0.05

KVBBSHV 4x6

SKU: 20006678

KVBBSHV 4x6 is an abbreviated marking of an armored control cable with 4 copper cores with a cross section of 6 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

6 sq mm

Sold out

$3.17

$3.23

- 1%

Saving $0.06

SIP-2 3x50+1x54,6 - 0.6/1

SKU: 20008291

SIP-2 3x50+1x54,6 - 0.6/1 - this is a self-supporting insulated wire (Type-2) - 3 by 50 mm2 + 1 by 54.6 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

50 sq mm

Sold out

$3.18

$3.23

- 1%

Saving $0.05

AC 240/32

SKU: 20005535

AC 240/32 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 240 millimeters square and a steel bearing core with a cross section of 32 mm2.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

Number of cores:

Cross section of the main core:

240 sq mm

Sold out

$3.18

$3.23

- 1%

Saving $0.05

KVVGEng(A) 10x2.5

SKU: 20007021

KVVGEng(A) 10x2.5 is an abbreviated marking of a control cable with 14 copper cores, 2.5 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$3.18

$3.23

- 1%

Saving $0.05

APvPu 1x50/16-10

SKU: 20005576

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

Brand:

ProCab

Cable type:

Mounting

Cable brand:

APV

Number of cores:

Cross section of the main core:

50 sq mm

Sold out

$3.21

$3.26

- 1%

Saving $0.05

KVBBSHVNG 10x2.5

SKU: 20006612

KVBBSHVNG 10x2.5 is an abbreviated marking of an armored control cable with 10 copper cores with a cross section of 2.5 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$3.21

$3.26

- 1%

Saving $0.05

VBSHV 4x6ok-1

SKU: 20005890

VBSHV 4x6ok-1 cable from the power class with a copper core, is equipped with a durable and non-flammable plastic shell, reliable insulation; it is used as a device transmitting and distributing electricity in stationary installations. Optimal operation is at a frequency of 50 Hz and a voltage within 0.66 — 1 kV.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VBShv

Number of cores:

Cross section of the main core:

6 sq mm

Sold out

$3.21

$3.26

- 1%

Saving $0.05

KVVGng(A)-LS 19x1.5

SKU: 20006823

KVVGng(A)-LS 19x1.5 is an abbreviated marking of a control cable with 19 copper cores, 1.5 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The control non-combustible KVVGng-(A) LS 19*1.5 cable is designed for fixed connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1.5 sq mm

Sold out

$3.22

$3.27

- 1%

Saving $0.05

AC 400/64

SKU: 20005674

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

Number of cores:

Cross section of the main core:

400 sq mm

Sold out

$3.22

$3.28

- 1%

Saving $0.06

KVVGE 19x1.5

SKU: 20006941

KVVGE 19x1.5 is an abbreviated marking of a control cable with 19 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic with reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1.5 sq mm

Sold out

$3.25

$3.30

- 1%

Saving $0.05