Buy Cables and wires at Schetchik.uz

Accessories for cable products 101 product

PRODUCT CATALOG

Popular products

Transition barrel Dn 20-20 HP

1-phase electricity meter | DDS 28 U 220V 5-60A | PLC modem

Filter mesh plastic Dn-20

Watch all...

Found products - 1178

ProCab

reset

12/24/36/48

New & Popular

Page 17 from 40

AVBbShv 3x16+1x10-0.66

SKU: 20004341

AVBbShv 3x16+1x10-0.66 is a power armored cable - 3 by 16 mm2 + 1 by 10 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

AVBbShv

Number of cores:

Cross section of the main core:

16 sq mm

Sold out

$2.03

- 1%

Saving $0.03

SIP-4 4x35

SKU: 20008223

SIP-4 4x35 is a self-supporting insulated wire (Type-4) - 4 by 35 mm2, with aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene.This wire is intended for branches from main power transmission lines to the input and for laying along the walls of buildings and engineering structures at a nominal voltage of up to 1000 Volts inclusive.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

35 sq mm

Sold out

$2.03

- 1%

Saving $0.03

Akvgeng(A) 10x6,0

SKU: 20005344

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.

Brand:

ProCab

Cable type:

Checking

Cable brand:

AKVVG

Number of cores:

Cross section of the main core:

6 sq mm

Sold out

$2.01

$2.04

- 1%

Saving $0.03

SIP-3 1x120 - 20

SKU: 20008273

SIP-3 1x120 - 20 is a self-supporting insulated wire (Type-3) - 1 by 120 mm2, with steel-aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

120 sq mm

Sold out

$2.01

$2.04

- 1%

Saving $0.03

KVVGEng 10x1.5

SKU: 20006984

KVVGEng 10x1.5 is an abbreviated marking of a control cable with 10 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic with reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1.5 sq mm

Sold out

$2.04

$2.07

- 1%

Saving $0.03

Akvgeng(A)-LS 10x6

SKU: 20005495

Brand:

ProCab

Cable type:

Checking

Cable brand:

AKVVG

Number of cores:

Cross section of the main core:

6 sq mm

Sold out

$2.05

$2.08

- 1%

Saving $0.03

KVVG 19x1,0

SKU: 20006768

KVVG 19x1.0 is an abbreviated marking of a control cable with 19 copper cores, a cross section of 1.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$2.05

$2.09

- 1%

Saving $0.04

KVVG 14x1.5

SKU: 20006734

KVVG 14x1.5 is an abbreviated marking of a control cable with 14 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic with reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1.5 sq mm

Sold out

$2.05

$2.09

- 1%

Saving $0.04

KVVGEng 14x1,0

SKU: 20006956

KVVGEng 14x1.0 is an abbreviated marking of a control cable with 14 copper cores, a cross section of 1.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$2.07

$2.11

- 1%

Saving $0.04

KVVGE 4x4

SKU: 20006950

KVVGE 4x4 is an abbreviated marking of a control cable with 4 copper cores, a cross section of 4 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

4 sq mm

Sold out

$2.08

$2.11

- 1%

Saving $0.03

AKVGNG(A)-LS 27x2.5

SKU: 20005349

Brand:

ProCab

Cable type:

Checking

Cable brand:

AKVVG

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$2.08

$2.12

- 1%

Saving $0.04

KVVGE 14x1

SKU: 20006998

KVVGE 14x1 is an abbreviated marking of a control cable with 14 copper cores, a cross section of 1 mm square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$2.08

$2.12

- 1%

Saving $0.04

PuGV 1x25,0

SKU: 20007880

PuGV 1x25 is a power installation (mounting) wire with a copper multi-wire core with a cross section of 25 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

Brand:

ProCab

Cable type:

Mounting

Cable brand:

PUGB

Number of cores:

Cross section of the main core:

25 sq mm

Sold out

$2.08

$2.12

- 1%

Saving $0.04

SIP-4 4x35 - 0.6/1

SKU: 20008330

SIP-4 4x35 - 0.6/1- this is a self-supporting insulated wire (Type-4) - 4 by 35 mm2, with aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene.This wire is intended for branches from main power transmission lines to the input and for laying along the walls of buildings and engineering structures at a nominal voltage of up to 1000 Volts inclusive.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

35 sq mm

Sold out

Bought - 119 pcs

$2.09

$2.12

- 1%

Saving $0.03

VBBSHV 3x4+1x2,5(oj)-1

SKU: 20005650

VBBSHVNG 3x4+1x2.5(oj)-1 is a power armored cable with tapes - 3 by 4 mm2 + 1 by 2.5 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VBbShv

Number of cores:

Cross section of the main core:

4 sq mm

Sold out

$2.10

$2.13

- 1%

Saving $0.03

KVVGEng 7x2.5

SKU: 20006971

KVVGEng 7x2.5 is an abbreviated marking of a control cable with 7 copper cores, 2.5 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$2.10

$2.14

- 1%

Saving $0.04

KVBBSHVNG 5x2,5

SKU: 20006765

KVBBSHVNG 5x2.5 is an abbreviated marking of an armored control cable with 5 copper cores with a cross section of 2.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$2.11

$2.14

- 1%

Saving $0.03

KVVGng 14x1.5

SKU: 20006893

KVVGng 14x1.5 is an abbreviated marking of a control cable with 14 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1.5 sq mm

Sold out

$2.11

$2.14

- 1%

Saving $0.03

AVBbShv 3x25+1x16-1

SKU: 20004332

AVBbShv 3x25+1x16-1 is a power armored cable - 3 by 25 mm2 + 1 by 16 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

AVBbShv

Number of cores:

Cross section of the main core:

25 sq mm

Sold out

$2.11

$2.15

- 1%

Saving $0.04

KVVGEng 4x4,0

SKU: 20006949

KVVGEng 4x4.0 is an abbreviated marking of a control cable with 4 copper cores, a cross section of 4.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

4 sq mm

Sold out

$2.12

$2.15

- 1%

Saving $0.03

PV-3 25

SKU: 20007510

PV-3 25 is a power installation wire with a copper multi-wire core with a cross section of 25 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

Brand:

ProCab

Cable type:

Mounting

Cable brand:

Number of cores:

Cross section of the main core:

25 sq mm

Sold out

$2.12

$2.16

- 1%

Saving $0.04

PV-1 25

SKU: 20007538

PV-1 25 is a power installation wire with a copper multi-wire core with a cross section of 25 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

Brand:

ProCab

Cable type:

Mounting

Cable brand:

Number of cores:

Cross section of the main core:

25 sq mm

Sold out

$2.12

$2.16

- 1%

Saving $0.04

KVVGEng(A) 14x1,0

SKU: 20007019

KVVGEng(A) 14x1.0 is an abbreviated marking of a control cable with 14 copper cores, a cross section of 1.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$2.13

$2.17

- 1%

Saving $0.04

KVVGEng(A)-LS 4x4,0

SKU: 20007023

KVVGEng(A)-LS 4x4.0 is an abbreviated marking of a control cable with 4 copper cores, a cross section of 4.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

4 sq mm

Sold out

$2.14

$2.18

- 1%

Saving $0.04

KVVGng 19x1,0

SKU: 20006887

KVVGng 19x1.0 is an abbreviated marking of a control cable with 19 copper cores, a cross section of 1.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$2.15

$2.18

- 1%

Saving $0.03

AVBBSHVNG 3x25-1

SKU: 20004429

AVBBSHVNG 3x25-1 is a power armored cable - 3 by 25 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

AVBbShv

Number of cores:

Cross section of the main core:

25 sq mm

Sold out

$2.15

$2.18

- 1%

Saving $0.03

SIP-3 1x150-35

SKU: 20008218

SIP-3 1x150-35 is a self-supporting insulated wire (Type-3) - 1 by 150 mm2, with steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

150 sq mm

Sold out

$2.16

$2.20

- 1%

Saving $0.04

KVVGEng(A)-LS 14x1,0

SKU: 20007047

KVVGEng(A)-LS 14x1.0 is an abbreviated marking of a control cable with 14 copper cores, a cross section of 1.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$2.17

$2.20

- 1%

Saving $0.03

VBBSHVNG 5x2,5(oj)-1

SKU: 20005721

VBBSHVNG 5x2.5(oj)-1 is a power armored cable - 5 by 2.5 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VBbShv

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$2.17

$2.21

- 1%

Saving $0.04

SIP-2 3x25+1x54,6

SKU: 20008213

SIP-2 3x25+1x54.6 is a self-supporting insulated wire (Type-2) - 3 by 25 mm2 + 1 by 54.6 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

25 sq mm

Sold out

$2.18

$2.22

- 1%

Saving $0.04