Buy Cables and wires at Schetchik.uz

Accessories for cable products 101 product

PRODUCT CATALOG

Popular products

Current Transformer 200/5A ESS

GSM SIM card for cellular communication

3-phase electricity meter | EX518 U | 380V 100A | PLC modem

Watch all...

Found products - 1178

ProCab

reset

12/24/36/48

New & Popular

Page 14 from 40

SIP-4 4x25 - 0.6/1

SKU: 20008370

SIP-4 4x25 - 0.6/1- this is a self-supporting insulated wire (Type-4) - 4 by 25 mm2, with aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene.This wire is intended for branches from main power transmission lines to the input and for laying along the walls of buildings and engineering structures at a nominal voltage of up to 1000 Volts inclusive.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

25 sq mm

Sold out

$1.61

$1.63

- 1%

Saving $0.02

RUNWAY 16

SKU: 20006657

Runway 16 is a power water-submersible (deep) wire (cable) with one copper multi-wire core with a cross section of 16 millimeters square, in polyethylene insulation and shell.The water-submersible deep wire is designed for connection to electrical networks with a voltage of up to 660 Volts with a frequency of 50 Hertz, for operation in a fixed position during long-term operation of water-submersible electric motors in the water of artesian wells under a pressure of 6.86x106 Pa at ambient temperatures from -40 ° C to +80 ° C.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VPP

Number of cores:

Cross section of the main core:

16 sq mm

Sold out

Bought - 350 pcs

$1.61

$1.64

- 1%

Saving $0.03

VBBSHV 4x2.5(oj)-1

SKU: 20005778

VBBSHVNG 4x2.5(oj)-1 is a power armored cable - 4 by 2.5 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VBbShv

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$1.61

$1.64

- 1%

Saving $0.03

KVVGE 10x1

SKU: 20006953

KVVGE 10x1 is an abbreviated marking of a control cable with 10 copper cores, a cross section of 1 mm square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$1.61

$1.64

- 1%

Saving $0.03

SIP-4 4x25

SKU: 20008284

SIP-4 4x25 is a self-supporting insulated wire (Type-4) - 4 by 25 mm2, with aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene.This wire is intended for branches from main power transmission lines to the input and for laying along the walls of buildings and engineering structures at a nominal voltage of up to 1000 Volts inclusive.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

25 sq mm

Sold out

$1.61

$1.64

- 1%

Saving $0.03

KVVGEng(A) 10x1,0

SKU: 20006946

KVVGEng(A) 10x1.0 is an abbreviated marking of a control cable with 10 copper cores, a cross section of 1.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$1.61

$1.64

- 1%

Saving $0.03

KVVGEng(A) 7x1.5

SKU: 20007086

KVVGEng(A) 7x1.5 is an abbreviated marking of a control cable with 7 copper cores, 1.5 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1.5 sq mm

Sold out

$1.62

$1.64

- 1%

Saving $0.02

VBSHV 4x2,5ok-0.66

SKU: 20005896

The cable VBSHV 4x2.5ok-0.66 from the power class with a copper core, is equipped with a durable and non-flammable plastic shell, reliable insulation; it is used as a device transmitting and distributing electricity in stationary installations. Optimal operation is at a frequency of 50 Hz and a voltage within 0.66 — 1 kV.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VBShv

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$1.62

$1.64

- 1%

Saving $0.02

KVVG 7x2.5

SKU: 20006883

KVVG 7x2.5 is an abbreviated marking of a control cable with 7 copper cores, 0.75 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$1.62

$1.64

- 1%

Saving $0.02

KVBBSHVNG 5x1.5

SKU: 20006751

KVBBSHVNG 5x1.5 is an abbreviated marking of an armored control cable with 5 copper cores with a cross section of 1.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

1.5 sq mm

Sold out

$1.62

$1.64

- 1%

Saving $0.02

AKVGENG(A) 10x4,0

SKU: 20005365

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.

Brand:

ProCab

Cable type:

Checking

Cable brand:

AKVVG

Number of cores:

Cross section of the main core:

4 sq mm

Sold out

$1.62

$1.65

- 1%

Saving $0.03

AVBBSHVNG 3x16-1

SKU: 20004502

AVBBSHVNG 3x16-1 is a power armored cable - 3 by 16 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

AVBbShv

Number of cores:

Cross section of the main core:

16 sq mm

Sold out

$1.63

$1.65

- 1%

Saving $0.02

AVBbShv 3x16+1x10-1

SKU: 20004351

AVBbShv 3x16+1x10-1 is a power armored cable - 3 by 16 mm2 + 1 by 10 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

AVBbShv

Number of cores:

Cross section of the main core:

16 sq mm

Sold out

$1.64

$1.67

- 1%

Saving $0.03

KVVGEng(A)-LS 10x1,0

SKU: 20007071

KVVGEng(A)-LS 10x1.0 is an abbreviated marking of a control cable with 10 copper cores, a cross section of 1.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$1.65

$1.67

- 1%

Saving $0.02

AVBBSHVNG 5x10(oj)-1

SKU: 20004414

AVBBSHVNG 5x10(oj)-1 is a power armored cable with tapes - 5 by 10 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

AVBbShv

Number of cores:

Cross section of the main core:

10 sq mm

Sold out

$1.65

$1.67

- 1%

Saving $0.02

KVVGEng 5x2,5

SKU: 20006973

KVVGEng 5x2.5 is an abbreviated marking of a control cable with 5 copper cores, 2.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$1.65

$1.68

- 1%

Saving $0.03

KVBBSHVNG 7x1,0

SKU: 20006797

KVBBSHVNG 7x1.0 is an abbreviated marking of an armored control cable with 7 copper cores with a cross section of 1 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$1.65

$1.68

- 1%

Saving $0.03

KVVGgng 12x1,0

SKU: 20006871

KVVGgng 12x1.0 is an abbreviated marking of a control cable with 12 copper cores, a cross section of 1.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$1.65

$1.68

- 1%

Saving $0.03

KVVGng 7x2.5

SKU: 20006850

KVVGng 7x2.5 is an abbreviated marking of a control cable with 7 copper cores, 2.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$1.65

$1.68

- 1%

Saving $0.03

ERW 16.0 - 660

SKU: 20006582

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VPV

Number of cores:

Cross section of the main core:

660 sq mm

Sold out

$1.65

$1.68

- 1%

Saving $0.03

Akvgeng(A)-LS 10x4

SKU: 20005418

Brand:

ProCab

Cable type:

Checking

Cable brand:

AKVVG

Number of cores:

Cross section of the main core:

4 sq mm

Sold out

$1.65

$1.68

- 1%

Saving $0.03

SIP-3 1x95 - 20

SKU: 20008267

SIP-3 1x95 - 20 is a self-supporting insulated wire (Type-3) - 1 by 95 mm2, with steel-aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

SIP

Number of cores:

Cross section of the main core:

95 sq mm

Sold out

$1.66

$1.68

- 1%

Saving $0.02

KVVGEng(A)-LS 7x1.5

SKU: 20007101

KVVGEng(A)-LS 7x1.5 is an abbreviated marking of a control cable with 7 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1.5 sq mm

Sold out

$1.66

$1.69

- 1%

Saving $0.03

KVBBSHV 7x1.5

SKU: 20006658

KVBBSHV 7x1.5 is an abbreviated marking of an armored control cable with 4 copper cores with a cross section of 1.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

1.5 sq mm

Sold out

$1.66

$1.69

- 1%

Saving $0.03

KVBBSHVNG(A) 7x1,0

SKU: 20006776

KVBBSHVNG(A) 7x1.0 is an abbreviated marking of an armored control cable with 7 copper cores with a cross section of 1 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$1.67

$1.69

- 1%

Saving $0.02

KVVGE 14x0,75

SKU: 20006927

KVVGE 14x0.75 is an abbreviated marking of a control cable with 14 copper cores, 0.75 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

0.75 sq mm

Sold out

$1.68

$1.71

- 1%

Saving $0.03

KVBBSHVNG(A) 5x1.5

SKU: 20006801

KVBBSHVNG(A) 5x1.5 is an abbreviated marking of an armored control cable with 5 copper cores with a cross section of 1.5 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVBbShv

Number of cores:

Cross section of the main core:

1.5 sq mm

Sold out

$1.68

$1.71

- 1%

Saving $0.03

KVVGEng(A) 14x0,75

SKU: 20007105

KVVGEng(A) 14x0.75 is an abbreviated marking of a control cable with 14 copper cores, 0.75 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

0.75 sq mm

Sold out

$1.69

$1.72

- 1%

Saving $0.03

KVVGEng 10x1,0

SKU: 20006988

KVVGEng 10x1.0 is an abbreviated marking of a control cable with 10 copper cores, a cross section of 1.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Brand:

ProCab

Cable type:

Checking

Cable brand:

KVVG

Number of cores:

Cross section of the main core:

1 sq mm

Sold out

$1.69

$1.72

- 1%

Saving $0.03

VBBSHVNG 4x2.5(oj)-1

SKU: 20005709

Brand:

ProCab

Cable type:

Fiber optic

Cable brand:

VBbShv

Number of cores:

Cross section of the main core:

2.5 sq mm

Sold out

$1.69

$1.72

- 1%

Saving $0.03