УзКабель

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

PuV-3 1x1.0 is a power installation (mounting) wire with a copper single-wire (monolithic) residential section of 1.0 millimeters square. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PuV-3 1x1.50 is a power installation (mounting) wire with a copper single-wire (monolithic) residential section of 1.5 square millimeters.This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PuV-3 1x2.50 is a power installation (mounting) wire with a copper single-wire (monolithic) residential section of 2.5 millimeters square.This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PuV-3 1x4.0 is a power installation (mounting) wire with a copper single-wire (monolithic) residential section of 4.0 square millimeters.This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PuV-3 1x6.0 is a power installation (mounting) wire with a copper single-wire (monolithic) residential section of 6.0 millimeters square. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PuV-3 1x10 is a power installation (mounting) wire with a copper single-wire (monolithic) residential section of 10 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PuV-3 1x16 is a power installation (mounting) wire with a copper single-wire (monolithic) residential section of 16 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PuV-3 1x25 is a power installation (mounting) wire with a copper single-wire (monolithic) residential section of 25 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PuV-3 1x35.0 is a power installation (mounting) wire with a copper single-wire (monolithic) residential section of 35 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PuV-3 1x50 is a power installation (mounting) wire with a copper single-wire (monolithic) residential section of 50 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PuV-3 1x70.0 is a power installation (mounting) wire with a copper single-wire (monolithic) residential section of 70 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PuV-3 1x95.0 is a power installation (mounting) wire with a copper single-wire (monolithic) residential section of 95 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PuV 1x0.5 is a power installation (mounting) wire with a copper single-wire (monolithic) residential section of 0.5 millimeters square. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PuV 1x0.75 is a power installation (mounting) wire with a copper single-wire (monolithic) residential section of 0.75 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PVDPO 1,8 is a winding wire with a copper core in double–layer polyethylene insulation. The wires are designed for winding the stators of submerged water-filled electric motors that work for a long time in the water of artesian wells at a voltage of up to 660 V AC to 660 V AC with a frequency of 50 Hz.

PVDPO 2.0 is a winding wire with a copper core in double–layer polyethylene insulation. The wires are designed for winding the stators of submerged water-filled electric motors that work for a long time in the water of artesian wells at a voltage of up to 660 V AC to 660 V AC with a frequency of 50 Hz.

PVDPO 2,5 is a winding wire with a copper core in double–layer polyethylene insulation. The wires are designed for winding the stators of submerged water-filled electric motors that work for a long time in the water of artesian wells at a voltage of up to 660 V AC to 660 V AC with a frequency of 50 Hz.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

AVBbShv 3x50+1x25 (oj)-1 is a power armored cable - 3 by 50 mm2 + 1 by 25 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.