УзКабель

The insulated wire APPBN 2x2.5 is suitable for fixed laying in lighting networks with a rated voltage of up to 250 V AC with a frequency of 50 Hz for fireproof structures.

With the advent of the first technique, wire began to be considered the most popular and popular metal material. Initially, various methods were used for its production: it was forged and twisted into thin strips of metal in the form of a spiral.

High-frequency twisted pair cable for vnut. KKV-V-2+2x0.35 gaskets for video surveillance system gaskets. This cable is intended for internal laying and provides power or video transmission.

High-frequency twisted pair cable for vnut. KKV-V-2+2x0.35 gaskets for video surveillance system gaskets. This cable is intended for internal laying and provides power or video transmission.

The wire of the household APPBN 2x2.5 is intended for gaskets in lighting networks. The wire of household APPBN 2x2.5 with alternating current up to 1 kV has increased properties of stability and fire resistance

PPBN 2x1.5 is a polyvinyl chloride insulated wire, with copper cores, with a separating base, flat. Household wires (two-core) are intended for use in the repair, installation and operation of electric grid lines, subscriber distribution (telephone and broadcast) network lines and communication lines.

Signal-power wires of the brand and size of GSP 2x0.5, the cross section of the core is 0.5 mm. It can be used for mounting and attaching measuring instruments.

A 185 is an aluminum non-insulated wire for overhead power lines, with a residential cross section of 185 square millimeters.

And 25 is an aluminum non-insulated wire for overhead power lines, with a residential section of 25 millimeters square.

AC 600/72 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 600 millimeters square and a steel bearing core with a cross section of 72 mm2.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.