ProCab

These cables have low dielectric losses. They are installed mainly in residential and industrial premises. They can be laid indoors and outdoors, underground and in cable channels.

- Cables are designed for transmission and distribution of electrical energy in stationary installations at a nominal alternating voltage of 10 kV with a nominal frequency of 50 Hz for networks with grounded and insulated neutral.

- Cables are designed for transmission and distribution of electrical energy in stationary installations at a nominal alternating voltage of 10 kV with a nominal frequency of 50 Hz for networks with grounded and insulated neutral.

These cables have low dielectric losses. They are installed mainly in residential and industrial premises. They can be laid indoors and outdoors, underground and in cable channels.

These cables have low dielectric losses. They are installed mainly in residential and industrial premises. They can be laid indoors and outdoors, underground and in cable channels.

VBBSHVNG 3x150-1 is a power armored cable - 3 by 150 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

VBBSHVNG 2x70-1 is a power armored cable - 2 by 70 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

VBBSHVNG 2x120-1 is a power armored cable - 2 by 120 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

VBBSHVNG 3x35-1 is a power armored cable - 3 by 35 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

VBBSHVNG 5x95 is a power armored cable with tapes - 5 by 95 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

VBBSHVNG 3x185-1 is a power armored cable - 3 by 185 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

VBBSHVNG 5x6(oj)-1 is a power armored cable with tapes - 5 by 6 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

VBBSHVNG 5x10(oj)-1 is a power armored cable with tapes - 5 by 10 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

- Cables are designed for transmission and distribution of electrical energy in stationary installations at a nominal alternating voltage of 10 kV with a nominal frequency of 50 Hz for networks with grounded and insulated neutral.

These cables have low dielectric losses. They are installed mainly in residential and industrial premises. They can be laid indoors and outdoors, underground and in cable channels.

- Cables are designed for transmission and distribution of electrical energy in stationary installations at a nominal alternating voltage of 10 kV with a nominal frequency of 50 Hz for networks with grounded and insulated neutral.

These cables have low dielectric losses. They are installed mainly in residential and industrial premises. They can be laid indoors and outdoors, underground and in cable channels.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

KVVG 27x2.5 is an abbreviated marking of the control cable with 27 copper cores, 2.5 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

KVVGE 19x1.0 is an abbreviated marking of a control cable with 19 copper cores, a cross section of 1.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 19x1.5 is an abbreviated marking of an armored control cable with 19 copper cores with a cross section of 1.5 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 4x1.5 is an abbreviated marking of an armored control cable with 4 copper cores with a cross section of 1.5 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 10x1.0 is an abbreviated marking of an armored control cable with 10 copper cores with a cross section of 1.0 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 7x1.5 is an abbreviated marking of an armored control cable with 4 copper cores with a cross section of 1.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.

KVVGEng 4x2.5 is an abbreviated marking of a control cable with 4 copper cores, a cross section of 2.5 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 4x1.0 is an abbreviated marking of a control cable with 4 copper cores, a cross section of 1.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 4x6.0 is an abbreviated marking of a control cable with 4 copper cores, a cross section of 6.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.