ProCab

KVBBSHVNG(A)-LS 10x1.0 is an abbreviated marking of an armored control cable with 10 copper cores with a cross section of 1 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGng-LS 27x1 is an abbreviated marking of a control cable with 27 copper cores, a cross section of 1 mm square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The control non-combustible KVVGng-LS 27*1 cable is designed for fixed connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng(A) 19x2.5 is an abbreviated marking of a control cable with 19 copper cores, 2.5 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.

KVVGEng(A) 14x1.0 is an abbreviated marking of a control cable with 14 copper cores, a cross section of 1.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng-LS 37x0.75 is an abbreviated marking of a control shielded cable with 37 cores with a cross section of 0.75 square millimeters in insulation and a shell made of PVC plastic of reduced fire hazard with low smoke emission. The KVVGEng-LS 37x0.75 control shielded cable is designed for stationary connection to electrical devices and apparatus with a nominal alternating voltage of up to 660 Volts with a frequency of up to 100 Hertz.

KVVGEng(A) 10x1.0 is an abbreviated marking of a control cable with 10 copper cores, a cross section of 1.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng-LS 14x2.5 is an abbreviated marking of a control shielded cable with 14 cores with a cross section of 2.5 square millimeters in insulation and a shell made of PVC plastic of reduced fire hazard with low smoke emission. The KVVGEng-LS 14x2.5 shielded control cable is designed for stationary connection to electrical devices and apparatus with a nominal alternating voltage of up to 660 Volts with a frequency of up to 100 Hertz

PuGV 1x25 is a power installation (mounting) wire with a copper multi-wire core with a cross section of 25 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

KVVGng(A) 4x0.75 is an abbreviated marking of a control cable with 4 copper cores, 0.75 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGng-LS 10x0.75 is an abbreviated marking of a control cable with 10 copper cores, 0.75 mm square cross-section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The control non-combustible KVVGng-LS 10* 0.75 cable is designed for fixed connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 37x1 is an abbreviated marking of a control cable with 37 copper cores, a cross section of 1 mm square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

The cable VBSHV 3x16mk+1x10mk(N)-1 is from the power class with a copper core, equipped with a durable and non-flammable plastic shell, reliable insulation; it is used as a device transmitting and distributing electricity in stationary installations. Optimal operation is at a frequency of 50 Hz and a voltage within 0.66 — 1 kV.

KVBBSHV 27x0.75 is an abbreviated marking of an armored control cable with 27 copper cores with a cross section of 0.75 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGng(A) 7x1.5 is an abbreviated marking of a control cable with 7 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 5x1 is an abbreviated marking of an armored control cable with 27 copper cores with a cross section of 1 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 14x0.75 is an abbreviated marking of an armored control cable with 14 copper cores with a cross section of 0.75 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.

The wires are designed for stationary installation in lighting networks with a rated voltage of up to 250 V AC with a frequency of 50 Hz, installation and connection of household low-current appliances to the AC network with a voltage of up to 250 V with a frequency of 50 Hz.

KVVGng(A)-LS 19x2.5 is an abbreviated marking of a control cable with 19 copper cores, 2.5 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The control non-combustible KVVGng(A)-LS 19 * 2,5 cable is designed for fixed connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.

SIP-4 4x120 - 0.6/1 - this is a self-supporting insulated wire (Type-4) - 4 by 120 mm2, with aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene.This wire is intended for branches from main power transmission lines to the input and for laying along the walls of buildings and engineering structures at a nominal voltage of up to 1000 Volts inclusive.

Cable 4X1.5ok-1 from the power class with a copper core, is equipped with a durable and non-flammable plastic shell, reliable insulation; it is used as a device transmitting and distributing electricity in stationary installations. Optimal operation is at a frequency of 50 Hz and a voltage within 0.66 — 1 kV.

KVBBSHVNG(A)-LS 19x1.5 is an abbreviated marking of an armored control cable with 19 copper cores with a cross section of 1.5 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 10x6 is an abbreviated marking of an armored control cable with 10 copper cores with a cross section of 6 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 7x4 is an abbreviated marking of an armored control cable with 7 copper cores with a cross section of 4 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.

The wires are designed for stationary installation in lighting networks with a rated voltage of up to 250 V AC with a frequency of 50 Hz, installation and connection of household low-current appliances to the AC network with a voltage of up to 250 V with a frequency of 50 Hz.