ProCab

AVBBSHVNG 5x16-1 is a power armored cable - 5 by 16 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

VBBSHVNG 5x10-0.66 is a power armored cable with tapes - 5 by 10 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

AVBBSHVNG 4x185-1 is a power armored cable - 4 by 185 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBBSHVNG 4x240-1 is a power armored cable - 4 by 240 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBBSHVNG 5x10(oj)-1 is a power armored cable with tapes - 5 by 10 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBBSHVNG 5x2.5(oj)-1 is a power armored cable - 5 by 2.5 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

KVBBSHVNG 14x1.0 is an abbreviated marking of an armored control cable with 14 copper cores with a cross section of 1 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

SIP-3 1x185-20 is a self-supporting insulated wire (Type-3) - 1 by 185 mm2, with steel-aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene.Self-supporting insulated wires (CIP) are intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

KVPBSHV 19x1,5-0,66 is an abbreviated marking of an armored control cable with 19 copper cores with a cross section of 1.5 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

SIP-3 1x95-35 is a self-supporting insulated wire (Type-3) - 1 by 95 mm2, with steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene.Self-supporting insulated wires (CIP) are intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-2 3x70+1x54.6 is a self-supporting insulated wire (Type-2) - 3 by 70 mm2 + 1 by 54.6 mm2 (with a carrier 1x54.6), with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is designed for overhead main power transmission lines with a nominal voltage of up to 1000 Volts with a frequency of 50 Hertz.

SIP-3 1x25-20 is a self-supporting insulated wire (Type-3) - 1 by 25 mm2, with steel-aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene.Self-supporting insulated wires (CIP) are intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-3 1x70-35 is a self-supporting insulated wire (Type-3) - 1 by 70 mm2, with steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene.Self-supporting insulated wires (CIP) are intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-4 4x35 is a self-supporting insulated wire (Type-4) - 4 by 35 mm2, with aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene.This wire is intended for branches from main power transmission lines to the input and for laying along the walls of buildings and engineering structures at a nominal voltage of up to 1000 Volts inclusive.

KVBBSHVNG 10x2.5 is an abbreviated marking of an armored control cable with 10 copper cores with a cross section of 2.5 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

SIP-2 3x120+1x95 is a self-supporting insulated wire (Type-2) - 3 by 120 mm2 + 1 by 95 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-2 3x50+1x54.6 is a self-supporting insulated wire (Type-2) - 3 by 50 mm2 + 1 by 54.6 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-4 4x95 is a self-supporting insulated wire (Type-4) - 4 by 95 mm2, with aluminum cores covered with insulation from light-stabilized cross-linked polyethylene.This wire is intended for branches from main power transmission lines to the input and for laying along the walls of buildings and engineering structures at a nominal voltage of up to 1000 Volts inclusive.

KVBBSHVNG 14x2.5 is an abbreviated marking of an armored control cable with 14 copper cores with a cross section of 2.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

SIP-3 1x35-20 is a self-supporting insulated wire (Type-3) - 1 by 35 mm2, with steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-2 3x240+1x95 is a self-supporting insulated wire (Type-2) - 3 by 240 mm2 + 1 by 95 mm2 (with a 1x95 carrier), with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-2 3x25+1x54.6 is a self-supporting insulated wire (Type-2) - 3 by 25 mm2 + 1 by 54.6 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-4 4x70 is a self-supporting insulated wire (Type-4) - 4 by 70 mm2, with aluminum cores covered with insulation from light-stabilized cross-linked polyethylene.This wire is intended for branches from main power transmission lines to the input and for laying along the walls of buildings and engineering structures at a nominal voltage of up to 1000 Volts inclusive.

SIP-2 3x95+1x95 is a self-supporting insulated wire (Type-2) - 3 by 95 mm2 + 1 by 95 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-2 3x16+1x25 is a self-supporting insulated wire (Type-2) - 3 by 16 mm2 + 1 by 25 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-2 3x25+1x35 is a self-supporting insulated wire (Type-2) - 3 by 25 mm2 + 1 by 35 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-4 2x50 is a self-supporting insulated wire (Type-4) - 2 by 50 mm2, with aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene.This wire is intended for branches from main power transmission lines to the input and for laying along the walls of buildings and engineering structures at a nominal voltage of up to 1000 Volts inclusive.

SIP-2 3x35+1x54.6 is a self-supporting insulated wire (Type-2) - 3 by 35 mm2 + 1 by 54.6 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-2 3x50+1x70 is a self-supporting insulated wire (Type-2) - 3 by 50 mm2 + 1 by 70 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

KVBBSHVNG 5x1.5 is an abbreviated marking of an armored control cable with 5 copper cores with a cross section of 1.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.