Kabel

VVG 5x25mk - 0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

The cable is designed for operation in subscriber access networks in the frequency range up to 2048 kHz and the organization of lines on distribution telecommunication networks from the terminal device to the subscriber and sealing by transmission systems with a rated voltage of remote power supply up to 225 V or 350 V AC with a frequency of 50 Hz, or voltage up to 315 V and 500 V DC, respectively.

Signal-blocking cables are designed for electrical alarm systems, centralization and blocking, fire alarm and automation. They are used for single laying in rooms, dry channels and tunnels, in an aggressive environment in the absence of mechanical influences on the cable.

AVVGng(A)-3x50ms+1x25ms(N) - 1 is a power cable, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

The cable is designed for operation in subscriber access networks in the frequency range up to 2048 kHz and the organization of lines on distribution telecommunication networks from the terminal device to the subscriber and sealing by transmission systems with a rated voltage of remote power supply up to 225 V or 350 V AC with a frequency of 50 Hz, or voltage up to 315 V and 500 V DC, respectively.

The power cable with one aluminum a residential AVVGng(A) 1x16ok - 1 is distinguished by a low emission of smoke and gases during smoldering and gorenje. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

The wires are designed for stationary installation in lighting networks with a rated voltage of up to 250 V AC with a frequency of 50 Hz, installation and connection of household low-current appliances to the AC network with a voltage of up to 250 V with a frequency of 50 Hz.

Signal-blocking cables are designed for electrical alarm systems, centralization and blocking, fire alarm and automation. They are used for single laying in rooms, dry channels and tunnels, in an aggressive environment in the absence of mechanical influences on the cable.

AVVGng(A)-LS 4x25mk is a power cable - 4 by 25 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

KVBBSHVNG(A) 7x0.75 is an abbreviated marking of an armored control cable with 7 copper cores with a cross section of 0.75 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

VVGng(A)-LS 2x10mk-0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections

The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

AVVGng(A)-LS 5x120ms is a power cable with 5 aluminum cores with a cross section of 120 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission.This cable is designed for stationary installation in power grids with a rated voltage of up to 1000 Volts, a frequency of 50 Hertz and a current load of up to 30 amperes.

KVVGng(A) 7x0.75 is an abbreviated marking of a control cable with 7 copper cores, 0.75 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

VVG 1x10mk-0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVG 3x6ok - 0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

AVVG 4x2.5ok - 1 is a power cable - 4 by 2.5 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.