Kabel

AVVGng(A)-5x35mk - 1 is a power cable with 5 aluminum cores with a cross section of 35 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission.This cable is designed for stationary installation in power grids with a rated voltage of up to 1000 Volts, a frequency of 50 Hertz and a current load of up to 30 amperes.

The cable is designed for operation in subscriber access networks in the frequency range up to 2048 kHz and the organization of lines on distribution telecommunication networks from the terminal device to the subscriber and sealing by transmission systems with a rated voltage of remote power supply up to 225 V or 350 V AC with a frequency of 50 Hz, or voltage up to 315 V and 500 V DC, respectively.

Signal-blocking cables are designed for electrical alarm systems, centralization and blocking, fire alarm and automation. They are used for single laying in rooms, dry channels and tunnels, in an aggressive environment in the absence of mechanical influences on the cable.

VVGng(A) 2x4ok-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

KVBBSHVNG(A) 4x6.0 is an abbreviated marking of an armored control cable with 4 copper cores with a cross section of 6.0 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

VVG-Apg(A) 3x2.5ok-0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

KVVGE 4x6 is an abbreviated marking of a control cable with 4 copper cores, a cross section of 6 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

AVVGng(A)-LS 5x10ok is a power cable - 5 by 10 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

VVGng(A)-LS 1x2.5ok-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVGng(A) 4x6ok - 0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.

VVGng(A) 3x6.0 - 0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

Signal-blocking cables are designed for electrical alarm systems, centralization and blocking, fire alarm and automation. They are used for single laying in rooms, dry channels and tunnels, in an aggressive environment in the absence of mechanical influences on the cable.

AVVGng(A)-3x240ms+1x70ms - 1 is a power cable, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

PVS 4x1 is a connecting wire with 4 copper multi-wire cores with a cross section of 1 mm square, insulated and wrapped in PVC plastic. This wire is used to connect electrical appliances and power tools for home care and repair, washing machines, refrigerators, small mechanization tools for gardening and gardening and other similar machines and devices, and for the manufacture of extension cords for voltage up to 380 volts.

VVGng(A)-LS 2x1.5ok-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections

VVVG-P 2x2.5ok - 0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

Cable 3x6oc+1x2.5oc(PE)-0.66 from the power class with a copper core, equipped with a durable and non-flammable plastic shell, reliable insulation; used as a device transmitting and distributing electricity in stationary installations. Optimal operation is at a frequency of 50 Hz and a voltage within 0.66 — 1 kV.

KVVGE 4x4 is an abbreviated marking of a control cable with 4 copper cores, a cross section of 4 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

VVGng(A)-LS 4x6ok-0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections

Signal-blocking cables are designed for electrical alarm systems, centralization and blocking, fire alarm and automation. They are used for single laying in rooms, dry channels and tunnels, in an aggressive environment in the absence of mechanical influences on the cable.

VVG-Apg(A)-LS 2x10mk-0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections

KVVGng(A)-LS 4x1.5 is an abbreviated marking of a control cable with 4 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.