Kabel

APV 4.0 is a power wire with one aluminum core with a cross section of 4.0 millimeters square. The APV 4.0 wire is designed for stationary installation of electrical circuits with a rated voltage of up to 400 Volts, a frequency of 50 Hertz, a current of up to 63 amperes.

Runway 50 is a power water-submersible (deep) wire (cable) with one copper multi-wire core with a cross section of 50 millimeters square, in polyethylene insulation and shell.The water-submersible deep wire is designed for connection to electrical networks with a voltage of up to 660 Volts with a frequency of 50 Hertz, for operation in a fixed position during long-term operation of water-submersible electric motors in the water of artesian wells under a pressure of 6.86x106 Pa at ambient temperatures from -40 ° C to +80 ° C.

Runway 25 is a power water-submersible (deep) wire (cable) with one copper multi-wire core with a cross section of 25 millimeters square, in polyethylene insulation and shell.The water-submersible deep wire is designed for connection to electrical networks with a voltage of up to 660 Volts with a frequency of 50 Hertz, for operation in a fixed position during long-term operation of water-submersible electric motors in the water of artesian wells under a pressure of 6.86x106 Pa at ambient temperatures from -40 ° C to +80 ° C.

APV 6.0 is a power wire with one aluminum core with a cross section of 6.0 millimeters square. The APV 6.0 wire is designed for stationary installation of electrical circuits with a rated voltage of up to 400 Volts, a frequency of 50 Hertz, a current of up to 63 amperes.

KVBBSHV 14x1.0 is an abbreviated marking of an armored control cable with 14 copper cores with a cross section of 1.0 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

KVVG 7x4.0 is an abbreviated marking of a control cable with 27 copper cores, a cross section of 4.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVG 19x1.0 is an abbreviated marking of a control cable with 19 copper cores, a cross section of 1.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

KVVGng 4x1.5 is an abbreviated marking of a control cable with 5 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGng 7x1.5 is an abbreviated marking of a control cable with 5 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVG 19x1.5 is an abbreviated marking of a control cable with 19 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVG 7x2.5 is an abbreviated marking of a control cable with 7 copper cores, 0.75 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

KVVG 14x2.5 is an abbreviated marking of a control cable with 14 copper cores, 2.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

KVVG 7x1.5 is an abbreviated marking of the control cable with 7 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVG 10x4.0 is an abbreviated marking of a control cable with 10 copper cores, a cross section of 4.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGgng 27x1.5 is an abbreviated marking of a control cable with 27 copper cores, 1.5 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.