Сим

VVGng(A)-LS 5x2.5ok-0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections

AVVGng(A)-LS 3x10 is a power cable - 3 by 10 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard.The cables are designed for transmission and distribution of electric power and electrical signals in stationary installations at a nominal alternating voltage of 660 V and 1000 V of a nominal frequency of 50 Hz or at a constant voltage of 1000 V and 1500 V, respectively.

AVVGng(A)-LS 4x16ok is a power cable - 4 by 16 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

Signal-blocking cables are designed for electrical alarm systems, centralization and blocking, fire alarm and automation. They are used for single laying in rooms, dry channels and tunnels, in an aggressive environment in the absence of mechanical influences on the cable.

KSPV 18x0.4 is a cable for alarm systems, communications and telecommunications with 18 single-wire copper cores, 0.4 mm2 in section, insulated and sheathed in non-combustible PVC plastic with reduced smoke emission. This cable is used for stationary installation in alarm systems, data transmission, telecommunications, with an operating voltage of up to 250 volts.

KVVGEng(A) 7x1.0 is an abbreviated marking of a control cable with 7 copper cores, a cross section of 1.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

AVBbShv 4x6 (oj) - 0.66 is a power armored cable with tapes - 4 by 6 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

VVG-Apg(A)-LS 2x185mk-1VVG-Apg(A)-LS 3x6,0ok-0.66 with insulation and PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections

The power cable with one aluminum A residential AVVG 1x95mk - 1 is distinguished by low smoke and gas emission during smoldering and gorenje. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

The cable is designed for operation in subscriber access networks in the frequency range up to 2048 kHz and the organization of lines on distribution telecommunication networks from the terminal device to the subscriber and sealing by transmission systems with a rated voltage of remote power supply up to 225 V or 350 V AC with a frequency of 50 Hz, or voltage up to 315 V and 500 V DC, respectively.

APPV 2x2.5 - two aluminum cores with PVC plastic insulation. The APPV wire is designed for stationary laying in enclosed spaces and under a canopy in lighting and power networks, as well as for the installation of electrical equipment, machines, mechanisms and machine tools at a rated voltage of up to 450 V (for 450/750 V networks) with a frequency of up to 400 Hz or a constant voltage of up to 1000 V.

VVG 1x10mk-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

The 4x16mk-1 cable is from the power class with a copper core, equipped with a durable and non-flammable plastic shell, reliable insulation; it is used as a device transmitting and distributing electricity in stationary installations. Optimal operation is at a frequency of 50 Hz and a voltage within 0.66 — 1 kV.

KVVGng(A)-LS 4x2.5 is an abbreviated marking of a control cable with 4 copper cores, a cross section of 2.5 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng(A)-LS 37x0.75 is an abbreviated marking of a control cable with 37 copper cores, 0.75 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

AVVG(A)NG-LS 1x10mk is a power cable - 1 by 10 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

AVVG 3x10ok+1x6ok(N) - 0.66 is a power cable, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

VVGng(A)-LS 1x10mk-0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections

VVGng(A) 3x25mk - 0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVGng(A) 3x16mk+1x10mk(N) - 0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

AVVG(A)NG-LS 1x35mk is a power cable - 1 by 35 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

VVGng(A) 1x25mk - 1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVG 3x1.5ok - 0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.