Сим

VVG 4x10mk - 0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.

AVVGng(A)-3x150ms+1x70ms(N, PE) - 1 is a power cable with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

VVG-Apg(A) 2x4ok-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

The cable is designed for operation in subscriber access networks in the frequency range up to 2048 kHz and the organization of lines on distribution telecommunication networks from the terminal device to the subscriber and sealing by transmission systems with a rated voltage of remote power supply up to 225 V or 350 V AC with a frequency of 50 Hz, or voltage up to 315 V and 500 V DC, respectively.

AVVGng(A)-5x6ok - 1 is a power cable with 5 aluminum cores with a cross section of 6 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission.This cable is designed for stationary installation in power grids with a rated voltage of up to 1000 Volts, a frequency of 50 Hertz and a current load of up to 30 amperes.

KSPVE 4x0.8 is a cable for alarm systems, communications and telecommunications with 4 single-wire copper cores, 0.8 mm2 in section, insulated and sheathed in non-combustible PVC plastic with reduced smoke emission. This cable is used for stationary installation in alarm systems, data transmission, telecommunications, with an operating voltage of up to 250 volts.

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.

KVBBSHVNG(A)-LS 27x2.5 is an abbreviated marking of an armored control cable with 27 copper cores with a cross section of 2.5 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

AVVGng(A)-5x70ms - 1 is a power cable with 5 aluminum cores with a cross section of 70 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission.This cable is designed for stationary installation in power grids with a rated voltage of up to 1000 Volts, a frequency of 50 Hertz and a current load of up to 30 amperes.

AVVGng(A)-LS 5x50ms is a power cable with 5 aluminum cores with a cross section of 50 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission.This cable is designed for stationary installation in power grids with a rated voltage of up to 1000 Volts, a frequency of 50 Hertz and a current load of up to 30 amperes.

KVVGEng(A)-LS 14x1.0 is an abbreviated marking of a control cable with 14 copper cores, a cross section of 1.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHVNG(A) 10x0.75 is an abbreviated marking of an armored control cable with 10 copper cores with a cross section of 0.75 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 4x0.75 is an abbreviated marking of a control cable with 4 copper cores, 0.75 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

AVVG(A)NG-LS 1x4ok is a power cable - 1 by 4 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

VVG 1x6 OK-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVGng(A) 3x2.5 - 0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVGng(A)-LS 5x25mk-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections

VVGng(A)-LS 5x10mk-0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections

PVS 3x1.0 is a connecting wire with 3 copper multi-wire cores with a cross section of 1 mm square, insulated and wrapped in PVC plastic. This wire is used to connect electrical appliances and power tools for home care and repair, washing machines, refrigerators, small mechanization tools for gardening and gardening and other similar machines and devices, and for the manufacture of extension cords for voltage up to 380 volts.

The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

PVS 4x10 is a connecting wire with 4 copper multi-wire cores with a cross section of 10 millimeters square, insulated and wrapped in PVC plastic. This wire is used to connect electrical appliances and power tools for home care and repair, washing machines, refrigerators, small mechanization tools for gardening and gardening and other similar machines and devices, and for the manufacture of extension cords for voltage up to 380 volts.