Сим

AC 120/19 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 120 millimeters square and a steel bearing core with a cross section of 19 mm2.

And 16 is an aluminum non-insulated wire for overhead power lines, with a residential cross section of 16 millimeters square.

The cables are designed for stationary laying inside buildings and structures with a polyvinyl chloride plastic sheath.

GSP wire 1x0.5 is a field communication wire for geophysical research in the field signal-power, for laying in the ground, on the ground, for suspension on supports, short-term laying through water barriers.

PV-3 70 is a power installation wire with a copper multi-wire core with a cross section of 70 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

AC 185/43 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 185 millimeters square and a steel bearing core with a cross section of 43 mm2.

A 95 is an aluminum non-insulated wire for overhead power lines, with a residential cross section of 95 millimeters square.

A 70 is an aluminum non-insulated wire for overhead power lines, with a residential section of 70 millimeters square.

PV-1 35 is a power installation wire with a copper multi-wire core with a cross section of 35 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

A 500 is an aluminum non-insulated wire for overhead power lines, with a residential cross section of 500 square millimeters.

PVDPO 3,18 is a winding wire with a copper core in double-layer polyethylene insulation. The wires are designed for winding the stators of submerged water-filled electric motors that work for a long time in the water of artesian wells at a voltage of up to 660 V AC to 660 V AC with a frequency of 50 Hz.

PPBN 2x1.5 is a polyvinyl chloride insulated wire, with copper cores, with a separating base, flat. Household wires (two-core) are intended for use in the repair, installation and operation of electric grid lines, subscriber distribution (telephone and broadcast) network lines and communication lines.

AC 330/43 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 330 millimeters square and a steel bearing core with a cross section of 43 mm2.

PVS 5x2.5 is a connecting wire with 5 copper multi-wire cores with a cross section of 2.5 millimeters square, insulated and wrapped in PVC plastic. This wire is used to connect electrical appliances and power tools for home care and repair, washing machines, refrigerators, small mechanization tools for gardening and gardening and other similar machines and devices, and for the manufacture of extension cords for voltage up to 380 volts.

The PVDPO 3.54 winding wire is designed for winding stators of submersible water-filled electric motors. The vein is copper wire. Insulation — low density polyethylene. The shell is light—stabilized polyethylene.

The winding wire PVDPO 5,30 is designed for winding stators of submersible water-filled electric motors. The vein is copper wire. Insulation — low density polyethylene. The shell is light—stabilized polyethylene.

AC 150/24 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 150 millimeters square and a steel bearing core with a cross section of 24 mm2.

The PVDPO 1.06 winding wire is designed for winding stators of submersible water-filled electric motors. The vein is copper wire. Insulation — low density polyethylene. The shell is light—stabilized polyethylene.

The PVDPO 1.30 winding wire is designed for winding stators of submersible water-filled electric motors. The vein is copper wire. Insulation — low density polyethylene. The shell is light—stabilized polyethylene.

AC 185/29 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 185 millimeters square and a steel bearing core with a cross section of 29 mm2.

PVS 3x0.75 is a connecting wire with 3 copper multi-wire cores with a cross section of 0.75 millimeters square, insulated and wrapped in PVC plastic. This wire is used to connect electrical appliances and power tools for home care and repair, washing machines, refrigerators, small mechanization tools for gardening and gardening and other similar machines and devices, and for the manufacture of extension cords for voltage up to 380 volts.

PVS 4x1 is a connecting wire with 4 copper multi-wire cores with a cross section of 1 mm square, insulated and wrapped in PVC plastic. This wire is used to connect electrical appliances and power tools for home care and repair, washing machines, refrigerators, small mechanization tools for gardening and gardening and other similar machines and devices, and for the manufacture of extension cords for voltage up to 380 volts.

PVSe 2x0.75 shielded copper flexible stranded connecting wire with twisted copper, round-shaped stranded cores.

APV 10 is a power wire with one aluminum core with a cross section of 10 millimeters square. The APV 10 wire is designed for stationary installation of electrical circuits with a rated voltage of up to 400 Volts, a frequency of 50 Hertz, a current of up to 63 amperes.

High-frequency twisted pair cable for vnut. KKV-V-2+2x0.35 gaskets for video surveillance system gaskets. This cable is intended for internal laying and provides power or video transmission.

PUGNP is an insulated power wire. It is used in construction for the operation and installation of stationary gaskets in lighting networks with a voltage of 0.25 kilowatts with an electric current frequency of 50 hertz.

AVVG 3*10+1*6 - this is a power cable, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

High-frequency twisted pair cable for vnut. KKV-V-2+2x0.35 gaskets for video surveillance system gaskets. This cable is intended for internal laying and provides power or video transmission.

The insulated wire APPBN 2x2.5 is suitable for fixed laying in lighting networks with a rated voltage of up to 250 V AC with a frequency of 50 Hz for fireproof structures.

With the advent of the first technique, wire began to be considered the most popular and popular metal material. Initially, various methods were used for its production: it was forged and twisted into thin strips of metal in the form of a spiral.