Сим

KVBBSHV 19x1.0 is an abbreviated marking of an armored control cable with 19 copper cores with a cross section of 1.0 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 37x1.5 is an abbreviated marking of a control cable with 37 copper cores, a 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 27x1.5 is an abbreviated marking of a control cable with 27 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHVNG 5x1.0 is an abbreviated marking of an armored control cable with 5 copper cores with a cross section of 1 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

KVBBSHV 5x1.5 is an abbreviated marking of an armored control cable with 5 copper cores with a cross section of 1.5 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 19x1.0 is an abbreviated marking of a control cable with 5 copper cores, a cross section of 1.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 10x2.5 is an abbreviated marking of a control cable with 10 copper cores, a cross section of 2.5 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 19x1.5 is an abbreviated marking of a control cable with 19 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic with reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 5x4.0 is an abbreviated marking of a control cable with 5 copper cores, a cross section of 4.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 10x2.5 is an abbreviated marking of a control cable with 10 copper cores, 2.5 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 5x2.5 is an abbreviated marking of the control cable with 5 copper cores, 2.5 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 10x1.5 is an abbreviated marking of a control cable with 10 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

VVGz 4x6(OJ)-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVG-P 2x2.5(OJ)-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VBBSHVNG 5x185-1 is a power armored cable - 5 by 185 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

- Cables are designed for transmission and distribution of electrical energy in stationary installations at a nominal alternating voltage of 10 kV with a nominal frequency of 50 Hz for networks with grounded and insulated neutral;

VBBSHVNG 3x150+1x70-1 is a power armored cable - 3 by 150 mm2 + 1 by 70 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.

These cables have low dielectric losses. They are installed mainly in residential and industrial premises. They can be laid indoors and outdoors, underground and in cable channels.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings.

These cables have low dielectric losses. They are installed mainly in residential and industrial premises. They can be laid indoors and outdoors, underground and in cable channels.

Power cables with cross-linked polyethylene insulation, designed for the transmission and distribution of electrical energy in stationary installations, at an alternating voltage of 10, 20.35 kV with a frequency of 50 Hz for networks with an isolated or grounded neutral.

VBBSHVNG 5x120 is a power armored cable - 5 by 120 mm2, with a copper core, PVC insulation, a protective PVC hose of reduced flammability. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

They are used for stationary laying in the ground (in trenches) regardless of the degree of corrosion activity of soils and waters. It is allowed to be laid in the air without protection from solar radiation, including in cable structures, provided that additional fire protection measures are provided, for example, the application of fire-resistant coatings. Cables are laid on routes without limiting the difference in levels.