Сим

VVG 3x2.5(OJ)-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVG 2x35+1x10-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVG 2x35-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVG 2x10(OJ)-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVG 2x2.5(OJ)-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVG 3x4(OJ)-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVG 1x185-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVG 2x1.5(OJ)-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVG 2x50-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVG 1x95-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

SIP-3 1x185-20 is a self-supporting insulated wire (Type-3) - 1 by 185 mm2, with steel-aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene.Self-supporting insulated wires (CIP) are intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

KVPBSHV 19x1,5-0,66 is an abbreviated marking of an armored control cable with 19 copper cores with a cross section of 1.5 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

SIP-3 1x95-35 is a self-supporting insulated wire (Type-3) - 1 by 95 mm2, with steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene.Self-supporting insulated wires (CIP) are intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-2 3x70+1x54.6 is a self-supporting insulated wire (Type-2) - 3 by 70 mm2 + 1 by 54.6 mm2 (with a carrier 1x54.6), with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is designed for overhead main power transmission lines with a nominal voltage of up to 1000 Volts with a frequency of 50 Hertz.

SIP-3 1x25-20 is a self-supporting insulated wire (Type-3) - 1 by 25 mm2, with steel-aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene.Self-supporting insulated wires (CIP) are intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-3 1x70-35 is a self-supporting insulated wire (Type-3) - 1 by 70 mm2, with steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene.Self-supporting insulated wires (CIP) are intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-4 4x35 is a self-supporting insulated wire (Type-4) - 4 by 35 mm2, with aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene.This wire is intended for branches from main power transmission lines to the input and for laying along the walls of buildings and engineering structures at a nominal voltage of up to 1000 Volts inclusive.

KVBBSHVNG 10x2.5 is an abbreviated marking of an armored control cable with 10 copper cores with a cross section of 2.5 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

SIP-2 3x120+1x95 is a self-supporting insulated wire (Type-2) - 3 by 120 mm2 + 1 by 95 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-2 3x50+1x54.6 is a self-supporting insulated wire (Type-2) - 3 by 50 mm2 + 1 by 54.6 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-4 4x95 is a self-supporting insulated wire (Type-4) - 4 by 95 mm2, with aluminum cores covered with insulation from light-stabilized cross-linked polyethylene.This wire is intended for branches from main power transmission lines to the input and for laying along the walls of buildings and engineering structures at a nominal voltage of up to 1000 Volts inclusive.

KVBBSHVNG 14x2.5 is an abbreviated marking of an armored control cable with 14 copper cores with a cross section of 2.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

SIP-3 1x35-20 is a self-supporting insulated wire (Type-3) - 1 by 35 mm2, with steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-2 3x240+1x95 is a self-supporting insulated wire (Type-2) - 3 by 240 mm2 + 1 by 95 mm2 (with a 1x95 carrier), with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-2 3x25+1x54.6 is a self-supporting insulated wire (Type-2) - 3 by 25 mm2 + 1 by 54.6 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-4 4x70 is a self-supporting insulated wire (Type-4) - 4 by 70 mm2, with aluminum cores covered with insulation from light-stabilized cross-linked polyethylene.This wire is intended for branches from main power transmission lines to the input and for laying along the walls of buildings and engineering structures at a nominal voltage of up to 1000 Volts inclusive.

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.

SIP-2 3x95+1x95 is a self-supporting insulated wire (Type-2) - 3 by 95 mm2 + 1 by 95 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-2 3x16+1x25 is a self-supporting insulated wire (Type-2) - 3 by 16 mm2 + 1 by 25 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.