Провод

KVVGng(A)-LS 14x2.5 is an abbreviated marking of a control cable with 14 copper cores, 2.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

VVGng(A) 2x16mk-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections

KVVGEng(A) 10x1.5 is an abbreviated marking of a control cable with 10 copper cores, 1.5 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

AVVG(A)NG-LS 1x2.5ok is a power cable - 1 by 205 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

AVVG 3x10ok - 1 is a power cable - 3 by 10 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard.The cables are designed for transmission and distribution of electric power and electrical signals in stationary installations at a nominal alternating voltage of 660 V and 1000 V of a nominal frequency of 50 Hz or at a constant voltage of 1000 V and 1500 V, respectively.

KVVGEng(A)-LS 10x0.75 is an abbreviated marking of a control cable with 10 copper cores, 0.75 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KGtp 1x25 is a flexible power cable with a single copper core section of 25 mm2 in insulation and a thermoplastics shell. This cable is used to connect mobile mechanisms with a voltage of up to 660 volts and a frequency of up to 400 Hertz to electrical networks.

RUNWAY 70 - 660 is a power water-submersible (deep) wire (cable) with one copper multi-wire core with a cross section of 70 millimeters square, in polyethylene insulation and shell.The water-submersible deep wire is designed for connection to electrical networks with a voltage of up to 660 Volts with a frequency of 50 Hertz, for operation in a fixed position during long-term operation of water-submersible electric motors in the water of artesian wells under a pressure of 6.86x106 Pa at ambient temperatures from -40 ° C to +80 ° C.

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.

VVGng(A)-LS 5x1.5ok-0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections

The cable is designed for operation in subscriber access networks in the frequency range up to 2048 kHz and the organization of lines on distribution telecommunication networks from the terminal device to the subscriber and sealing by transmission systems with a rated voltage of remote power supply up to 225 V or 350 V AC with a frequency of 50 Hz, or voltage up to 315 V and 500 V DC, respectively.

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.

AVVG 3x6 - 0.66 is a power cable - 3 by 6 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard.The cables are designed for transmission and distribution of electric power and electrical signals in stationary installations at a nominal alternating voltage of 660 V and 1000 V of a nominal frequency of 50 Hz or at a constant voltage of 1000 V and 1500 V, respectively.

The cable is designed for operation in subscriber access networks in the frequency range up to 2048 kHz and the organization of lines on distribution telecommunication networks from the terminal device to the subscriber and sealing by transmission systems with a rated voltage of remote power supply up to 225 V or 350 V AC with a frequency of 50 Hz, or voltage up to 315 V and 500 V DC, respectively.

AVVG 3x25mk+1x16ok(N) - 1 is a power cable, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

PVS 4x16 is a connecting wire with 4 copper multi-wire cores with a cross section of 16 millimeters square, insulated and wrapped in PVC plastic. This wire is used to connect electrical appliances and power tools for home care and repair, washing machines, refrigerators, small mechanization tools for gardening and gardening and other similar machines and devices, and for the manufacture of extension cords for voltage up to 380 volts.

AVVG 3x10ok+1x4ok(PE) - 0.66 is a power cable, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.

AVVGng(A)- 4x4ok - 0.66 is a power cable - 4 by 4 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

KVBBSHVNG(A) 4x0.75 is an abbreviated marking of an armored control cable with 4 copper cores with a cross section of 0.75 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

Signal-blocking cables are designed for electrical alarm systems, centralization and blocking, fire alarm and automation. They are used for single laying in rooms, dry channels and tunnels, in an aggressive environment in the absence of mechanical influences on the cable.

AVVG 4x4ok - 0.66 is a power cable - 4 by 4 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz