Провод

VVG 4x1.5ok-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

KVVGng(A)-LS 7x0.75 is an abbreviated marking of a control cable with 7 copper cores, 0.75 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

APV 95.0 is a power wire with one aluminum core with a cross section of 10 millimeters square. The APV 10 wire is designed for stationary installation of electrical circuits with a rated voltage of up to 400 Volts, a frequency of 50 Hertz, a current of up to 63 amperes.

AVVGng(A)-3x35mk+1x16ok(N) - 0.66 is a power cable with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

AVVGng(A)-LS 5x4 is a power cable with 5 aluminum cores with a cross section of 4 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission.This cable is designed for stationary installation in power grids with a rated voltage of up to 1000 Volts, a frequency of 50 Hertz and a current load of up to 30 amperes.

SIP-2 3x35+1x54,6 - 0.6/1 - this is a self-supporting insulated wire (Type-2) - 3 by 35 mm2 + 1 by 54.6 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

TPVng cable 100x2x0.5 is a telephone cable with solid polyethylene insulation of cores, with a screen made of aluminum or aluminum polymer tape, in a shell made of PVC plastic of reduced flammability. Designed for use in local primary communication networks with a rated voltage of remote power supply up to 225 or 145 V AC with a frequency of 50 Hz or voltage up to 315 and 200 V DC, respectively: For laying on the inner walls of buildings and indoors. They have a protective shielded coating against electromagnetic pulses.

Signal-blocking cables are designed for electrical alarm systems, centralization and blocking, fire alarm and automation. They are used for single laying in rooms, dry channels and tunnels, in an aggressive environment in the absence of mechanical influences on the cable.

VBSHV 3x2.5ok-1 cable from the power class with a copper core, is equipped with a durable and non-flammable plastic shell, reliable insulation; it is used as a device transmitting and distributing electricity in stationary installations. Optimal operation is at a frequency of 50 Hz and a voltage within 0.66 — 1 kV.

The cable is designed for operation in subscriber access networks in the frequency range up to 2048 kHz and the organization of lines on distribution telecommunication networks from the terminal device to the subscriber and sealing by transmission systems with a rated voltage of remote power supply up to 225 V or 350 V AC with a frequency of 50 Hz, or voltage up to 315 V and 500 V DC, respectively.

AVVG 3x16(OJ) - 0.66 is a power cable - 3 by 16 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard.The cables are designed for transmission and distribution of electric power and electrical signals in stationary installations at a nominal alternating voltage of 660 V and 1000 V of a nominal frequency of 50 Hz or at a constant voltage of 1000 V and 1500 V, respectively.

AVVGng(A)-5x10ok - 0.66 is a power cable with 5 aluminum cores with a cross section of 10 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission.This cable is designed for stationary installation in power grids with a rated voltage of up to 1000 Volts, a frequency of 50 Hertz and a current load of up to 30 amperes.

SIP-2 3x50+1x54,6 - 0.6/1 - this is a self-supporting insulated wire (Type-2) - 3 by 50 mm2 + 1 by 54.6 mm2, with aluminum and steel-aluminum cores covered with insulation from light-stabilized cross-linked polyethylene. This wire is intended for use in overhead power transmission lines (power lines) with suspension on supports or facades of buildings and structures.

SIP-4 4x95 - 0.6/1- this is a self-supporting insulated wire (Type-4) - 4 by 35 mm2, with aluminum cores covered with insulation made of light-stabilized cross-linked polyethylene.This wire is intended for branches from main power transmission lines to the input and for laying along the walls of buildings and engineering structures at a nominal voltage of up to 1000 Volts inclusive.

VVGng(A) 3x10mk+1x6ok(N) - 1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

Signal-blocking cables are designed for electrical alarm systems, centralization and blocking, fire alarm and automation. They are used for single laying in rooms, dry channels and tunnels, in an aggressive environment in the absence of mechanical influences on the cable.

KVBBSHVNG(A)-LS 10x1.5 is an abbreviated marking of an armored control cable with 10 copper cores with a cross section of 1.5 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KSVPE-5e 4x2x0.52 is a network cable with a polyvinyl chloride plastic sheath consisting of several pairs of twisted insulated conductors. This communication cable is a computer cable and is designed for local area networks. The cable is used as a network carrier in modern information technologies, such as Ethernet, ARCNet.

KVVGng(A) 14x1.5 is an abbreviated marking of a control cable with 14 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.