Провод

AVVGng-LS 3x35 is a power cable - 3 by 35 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard.The cables are designed for transmission and distribution of electric power and electrical signals in stationary installations at a nominal alternating voltage of 660 V and 1000 V of a nominal frequency of 50 Hz or at a constant voltage of 1000 V and 1500 V, respectively.

VVG 3x2.5ok-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVGng(A) 4x2.5ok - 1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

Runway 1,2 - 380 is a power water-submersible (deep) wire (cable) with one copper multi-wire core with a cross section of 1.2 millimeters square, in polyethylene insulation and shell.The water-submersible deep wire is designed for connection to electrical networks with a voltage of up to 660 Volts with a frequency of 50 Hertz, for operation in a fixed position during long-term operation of water-submersible electric motors in the water of artesian wells under a pressure of 6.86x106 Pa at ambient temperatures from -40 ° C to +80 ° C.

KSPVE 4x0.8 is a cable for alarm systems, communications and telecommunications with 4 single-wire copper cores, 0.8 mm2 in section, insulated and sheathed in non-combustible PVC plastic with reduced smoke emission. This cable is used for stationary installation in alarm systems, data transmission, telecommunications, with an operating voltage of up to 250 volts.

The cable is designed for operation in subscriber access networks in the frequency range up to 2048 kHz and the organization of lines on distribution telecommunication networks from the terminal device to the subscriber and sealing by transmission systems with a rated voltage of remote power supply up to 225 V or 350 V AC with a frequency of 50 Hz, or voltage up to 315 V and 500 V DC, respectively.

AVVGng(A)-5x35mk - 0.66 is a power cable with 5 aluminum cores with a cross section of 35 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission.This cable is designed for stationary installation in power grids with a rated voltage of up to 1000 Volts, a frequency of 50 Hertz and a current load of up to 30 amperes.

AC 120/27 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 120 millimeters square and a steel bearing core with a cross section of 27 mm2. The wire is designed for installation on overhead power lines.

PVS 2x4.0 is a connecting wire with 2 copper multi-wire cores with a cross section of 4 millimeters square, insulated and wrapped in PVC plastic. This wire is used to connect electrical appliances and power tools for home care and repair, washing machines, refrigerators, small mechanization tools for gardening and gardening and other similar machines and devices, and for the manufacture of extension cords for voltage up to 380 volts.

VVGng(A)-LS 4x6ok-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

VVG 1x2.5 ok - 0.66 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

AVVG 3x6(OJ) - 0.66 is a power cable - 3 by 6 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard.The cables are designed for transmission and distribution of electric power and electrical signals in stationary installations at a nominal alternating voltage of 660 V and 1000 V of a nominal frequency of 50 Hz or at a constant voltage of 1000 V and 1500 V, respectively.

The cable is designed for operation in subscriber access networks in the frequency range up to 2048 kHz and the organization of lines on distribution telecommunication networks from the terminal device to the subscriber and sealing by transmission systems with a rated voltage of remote power supply up to 225 V or 350 V AC with a frequency of 50 Hz, or voltage up to 315 V and 500 V DC, respectively.

VVGng(A)-LS 1x16mk-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz.

AVVGng(A)-4x2.5ok - 0.66 is a power cable - 4 by 2.5 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

Signal-blocking cables are designed for electrical alarm systems, centralization and blocking, fire alarm and automation. They are used for single laying in rooms, dry channels and tunnels, in an aggressive environment in the absence of mechanical influences on the cable.

KVVGng(A) 10x1.0 is an abbreviated marking of a control cable with 10 copper cores, a cross section of 1.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KSPVE 16x0.5 is a cable for alarm systems, communications and telecommunications with 16 single-wire copper cores with a cross section of 0.5 mm2, insulated and coated with non-flammable PVC plastic with reduced smoke emission. This cable is used for stationary installation in alarm systems, data transmission, telecommunications, with an operating voltage of up to 250 volts.

AVVGE 4x6ok-0.66 is a power cable - 4 by 6 mm2, with an aluminum core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz

The cables are designed for fixed connection to electrical appliances, apparatuses, terminal assemblies of electrical switchgear with rated alternating voltage up to 660 V frequency up to 100 Hz or constant voltage up to 1000 V. Cables are used for laying outdoors, in rooms, channels, tunnels, in the ground (trenches) in an aggressive environment, in places exposed to stray currents, if the cables are not subjected to significant tensile forces and if there is a risk of mechanical damage during operation.