Провод

VVGng 5x4-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVGng 4x16-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVGng 4x1.5(OJ)-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

VVGng 3x25-1 is a power flat cable, with a copper core, insulation and a PVC shell of reduced fire hazard. The cables are designed for transmission and distribution of electricity in stationary electrical installations at a nominal alternating voltage of 0.66 and 1 kV with a nominal frequency of 50 Hz. For laying without limiting the level difference along the laying route, including on vertical sections.

AVBbShv 3x10+1x6 (oj)-1 is a power armored cable - 3 by 10 mm2 + 1 by 6 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVVGng 5x150 is a power cable with 5 aluminum cores with a cross section of 150 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission.This cable is designed for stationary installation in power grids with a rated voltage of up to 1000 Volts, a frequency of 50 Hertz and a current load of up to 30 amperes.

AVBBSHVNG 4x50-1 is a power armored cable - 4 by 50 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBBSHVNG 2x2.5(oj)-1 is a power armored cable - 2 by 2.5 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBbShv 3x50-1 is a power armored cable - 3 by 50 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBbShv 4x25-1 is a power armored cable - 4 by 25 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBBSHVNG 3x10(oj)-1 is a power armored cable - 3 by 10 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBBSHVNG 3x120+1x70 is a power armored cable - 3 by 120 mm2 + 1 by 70 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBBSHVNG 3x240-1 is a power armored cable - 3 by 240 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBbShv 4x70-1 is a power armored cable - 4 by 70 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBBSHVNG 3x150-1 is a power armored cable - 3 by 150 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBbShv 3x35-1 is a power armored cable - 3 by 35 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVVGng 5x50 is a power cable with 5 aluminum cores with a cross section of 50 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission.This cable is designed for stationary installation in power grids with a rated voltage of up to 1000 Volts, a frequency of 50 Hertz and a current load of up to 30 amperes.

AVBbShv 3x25+1x16-1 is a power armored cable - 3 by 25 mm2 + 1 by 16 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBbShv 5x25-1 is a power armored cable - 5 by 25 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBbShv 3x10(oj)-1 is a power armored cable - 3 by 10 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBBSHVNG 2x10(oj)-1 is a power armored cable - 2 by 10 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBBSHVNG 3x16-1 is a power armored cable - 3 by 16 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBBSHVNG 3x4.0(oj)-1 is a power armored cable - 3 by 4.0 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBbShv 4x50-1 is a power armored cable - 4 by 50 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBbShv 3x95-1 is a power armored cable - 3 by 95 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBBSHVNG 3x25-1 is a power armored cable - 3 by 25 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBbShv 4x185-1 is a power armored cable - 4 by 185 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBBSHVNG 3x185+1x95-1 is a power armored cable - 3 by 185 mm2 + 1 by 95 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBbShv 3x6+1x4(oj)-1 is a power armored cable - 3 by 6 mm2 + 1 by 4 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.

AVBBSHVNG 3x50+1x25-1 is a power armored cable - 3 by 50 mm2 + 1 by 25 mm2, with an aluminum core, PVC insulation, a protective PVC hose of reduced flammability. AVBbShv is used for transmission and distribution of electricity in stationary low - voltage installations . This cable is designed for laying in dry and humid areas. It is possible to lay in the ground and in the air. The AVBBSHV cable is well protected from the danger of mechanical damage.