Провод

PV-3 0.5 is a power installation wire with a copper multi-wire core with a cross section of 0.5 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PV-1 95 is a power installation wire with a copper multi-wire core with a cross section of 95 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PV-1 1.0 is a power installation wire with a copper multi-wire core with a cross section of 1.0 millimeters square. The cable is used in devices of electrical equipment for special industrial purposes such as machine tools, electric machines, electromechanisms.

PuV 1x25 is a power installation (mounting) wire with a copper single-wire (monolithic) residential section of 25 square millimeters. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

PuGV 1x2.5 is a power installation (mounting) wire with a copper multi-wire core with a cross section of 2.5 millimeters square. This wire is designed for stationary laying in power grids with a voltage of up to 750 Volts, a frequency of up to 400 Hertz.

APPV 3x2.5 - three aluminum cores with PVC plastic insulation. The APPV wire is designed for stationary laying in enclosed spaces and under a canopy in lighting and power networks, as well as for the installation of electrical equipment, machines, mechanisms and machine tools at a rated voltage of up to 450 V (for 450/750 V networks) with a frequency of up to 400 Hz or a constant voltage of up to 1000 V.

APPV 2x2.5 - two aluminum cores with PVC plastic insulation. The APPV wire is designed for stationary laying in enclosed spaces and under a canopy in lighting and power networks, as well as for the installation of electrical equipment, machines, mechanisms and machine tools at a rated voltage of up to 450 V (for 450/750 V networks) with a frequency of up to 400 Hz or a constant voltage of up to 1000 V.

PPBN 2x4.0 is a polyvinyl chloride insulated wire, with copper cores, with a separating base, flat. Household wires (two-core) are intended for use in the repair, installation and operation of electric grid lines, subscriber distribution (telephone and broadcast) network lines and communication lines.

AC 50/8.0 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 300 millimeters square and a steel bearing core with a cross section of 8.0 mm2. The wire is designed for installation on overhead power lines.

AC 400/93 is a non-insulated steel-aluminum wire with an aluminum core with a cross section of 400 millimeters square and a steel bearing core with a cross section of 93 mm2. The wire is designed for installation on overhead power lines.

PPV wire 3x2.5 copper flat 3-core mounting with a separate base. Wires are used for electrical installations with stationary laying in lighting and power networks, as well as for the installation of electrical equipment, machines, mechanisms and machine tools at a rated voltage of up to 450 Volts (U0 /U=450/750 V) with a frequency of 400 Hz or a constant voltage of up to 1000 Volts.

PVDPO 4.50 is a winding wire with a copper core in double–layer polyethylene insulation.The wires are designed for winding the stators of submerged water-filled electric motors that work for a long time in the water of artesian wells at a voltage of up to 660 V AC to 660 V AC with a frequency of 50 Hz.

KVVGEng 10x1.0 is an abbreviated marking of a control cable with 10 copper cores, a cross section of 1.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 27x1.5 is an abbreviated marking of an armored control cable with 27 copper cores with a cross section of 1.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 4x6.0 is an abbreviated marking of a control cable with 4 copper cores, a cross section of 6.0 millimeters square, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 27x2.5 is an abbreviated marking of a control cable with 27 copper cores, 2.5 mm square cross section, insulated and coated with polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHVNG 7x1.0 is an abbreviated marking of an armored control cable with 7 copper cores with a cross section of 1 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 10x4.0 is an abbreviated marking of a control cable with 10 copper cores, a cross section of 4.0 millimeters square, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGE 14x1.5 is an abbreviated marking of a control cable with 14 copper cores, a 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 37x1.5 is an abbreviated marking of an armored control cable with 37 copper cores with a cross section of 1.5 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 4x1.0 is an abbreviated marking of an armored control cable with 4 copper cores with a cross section of 1.0 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 14x2.5 is an abbreviated marking of a control cable with 14 copper cores, 2.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 5x2.5 is an abbreviated marking of an armored control cable with 5 copper cores with a cross section of 2.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 14x1.5 is an abbreviated marking of a control cable with 14 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 14x2.5 is an abbreviated marking of an armored control cable with 14 copper cores with a cross section of 2.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 10x1.5 is an abbreviated marking of an armored control cable with 10 copper cores with a cross section of 1.5 square millimeters, insulated and coated with polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVBBSHV 5x1.0 is an abbreviated marking of an armored control cable with 5 copper cores with a cross section of 1.0 square millimeters, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard with low smoke emission. The armored non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.

KVVGEng 5x1.5 is an abbreviated marking of a control cable with 5 copper cores, 1.5 mm square cross section, insulated and sheathed in polyvinyl chloride plastic of reduced fire hazard and reduced smoke emission. The non-combustible control cable is designed for stationary connection to electrical devices with a voltage of up to 660 Volts of alternating current with a frequency of up to 100 Hertz.