1-phase Electricity Meter | Energomera CE-208 S7

Multifunctional single-phase electricity meter of the energy meter CE 208 S7 direct connection. Fully complies with the requirements for electricity metering devices. The meter is maximally protected from theft of electricity and is used as part of the ASKUE to transmit the measured parameters to the control room for monitoring, accounting and distribution of electric energy.

RELIABILITY CHARACTERISTICS:
The average time to failure is 220000 hours.
The verification interval is 16 years.
The average service life is 30 years.

FUNCTIONALITY:
Support for the IEC 61107 – 2011 and IEC 62056 SPODES/DLMS exchange protocol.
Versions with communication modules PLC G3, RS485, GSM/GPRS.

Measurement of electricity quality indicators according to class "S":
positive and negative voltage deviation;
network frequency deviation;
duration and depth of voltage failure;
duration and maximum overvoltage value;
power supply interruptions.

Measurement of network parameters:
voltage frequencies;
currents;
voltage;
angles between current and voltage;
power coefficients;
active power;
reactive power;
full power.

Information protection.
Protection against unauthorized opening (electronic seals).
Magnetic field sensor.
Event logs.

Maintaining 60 types of events in two logs, taking into account the time of violations, including:
Counter event log (34 events, 400 entries);
Settings change log (26 events, 280 entries).

Maintaining a retrospective of accounting:
Recording of accounting data (in total and according to tariffs) for active and reactive energy when the day changes.
Recording of accounting data (in total and according to tariffs) for active and reactive energy during the change of months (with a programmable end date of the billing period).
Recording of accounting data (in total and according to tariffs) for active and reactive energy during the change of years.
Recording of accounting data (in total and according to tariffs) for active and reactive energy by events or command.
Maintaining a load profile, with the ability to configure the type of stored parameters and averaging time.
Analysis of the quality of electricity.
Monitoring of the consumed active power.
Control of the consumed "instantaneous power".
Monitoring of active energy consumption.
Monitoring of the supply network voltage.
Network frequency control.
Alarm relay.
Telemetry outputs with the possibility of using them as a "relay".
Beep.
Signaling via the interface.
Self-diagnosis.
A mechanism for flexibly adjusting the response to events that occur in the counter.
Displaying information on the LCD accompanied by OBIS codes.
Managing the load of the consumer according to a given schedule.

For more information about the product, please check with the seller by contacting him by phone +99871 200-18-00